Fritz & Franz: Difference between revisions
NitramLegov (talk | contribs) (Creation) |
m (Category:Sliding Table Saw Jigs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
Fritz & Franz | {{AccessoryInfoBox | ||
|tool name=Fritz & Franz | |||
|german=Fritz & Franz | |||
|type=workholding accessory | |||
|material=[[wood]] | |||
|used with=[[Used With::Altendorf F 45]] | |||
|similar=[[Edging Shoes]]}} | |||
Fritz & Franz need to be used for workholding on the [[Sliding Table Saw|sliding table saw]] especially when cutting through narrow workpieces (< 240 mm). | |||
Place the small part directly in front of the crosscut fence and press the workpiece against it with the larger part. If you use the parallel fence to align the workpiece, make sure to pull it back so it does '''not''' overlap with the blade (two fences rule)! | |||
Please note that you need to use the [[Edging Shoe|edging shoe]] whenever you are trimming thick and/or '''warped''' boards as these need to be held down in addition to end-to-end pressure. | |||
== Making & Upgrades == | |||
This [[jig]] is rather easy to make from scratch (see links below), but we ordered a [https://shop.clw.gmbh/produkt/fritz-und-franz-dark-edition-saegehilfe-fuer-formatkreissaegen kit from Chiemgau Lebenshilfe Werkstätten] to save time and get the BG recommended rubber edging. | |||
'''Precise''' scales on both parts would be a nice upgrade! | |||
== Further Information == | |||
* [https://www.youtube.com/watch?v=DqzVglze9Nk ''Anwendungsvideo der Holz BG''] (240p...) | |||
* [https://www.schreiner-seiten.de/maschinen/fks-fritz-franz.php ''Schreiner-Seiten''] | |||
* [https://cowiki.de/beitrag/fritz-und-franz ''VoW CoWiki''] | |||
[[Category:Sliding Table Saw Jigs]] | |||
[[Category:Woodworking]] | |||
<br clear="all"> | |||
Latest revision as of 08:34, 13 September 2024
| AccessoryInfoBox Fritz & Franz | |
|---|---|
| |
| Type: | workholding accessory |
| Material: | wood |
| Used with: | Altendorf F 45 |
| Similar (More or Less): | Edging Shoes |
Fritz & Franz need to be used for workholding on the sliding table saw especially when cutting through narrow workpieces (< 240 mm).
Place the small part directly in front of the crosscut fence and press the workpiece against it with the larger part. If you use the parallel fence to align the workpiece, make sure to pull it back so it does not overlap with the blade (two fences rule)!
Please note that you need to use the edging shoe whenever you are trimming thick and/or warped boards as these need to be held down in addition to end-to-end pressure.
Making & Upgrades
This jig is rather easy to make from scratch (see links below), but we ordered a kit from Chiemgau Lebenshilfe Werkstätten to save time and get the BG recommended rubber edging.
Precise scales on both parts would be a nice upgrade!
Further Information
