Compressor Introduction: Difference between revisions
From CoMakingSpace Wiki
m (→Precautions: removed old note) |
No edit summary |
||
Line 31: | Line 31: | ||
== Further Reading == | == Further Reading == | ||
* [http://schreiner-abz.ch/media/schreinerpraktiker_suva/Suvapro_Druckluft_die_unsichtbare_Gefahr.pdf ''"Druckluft - die unsichtbare Gefahr" (DE)''] | * [http://schreiner-abz.ch/media/schreinerpraktiker_suva/Suvapro_Druckluft_die_unsichtbare_Gefahr.pdf ''"Druckluft - die unsichtbare Gefahr" (DE)''] | ||
[[Category:Introductions]] |
Revision as of 03:51, 25 March 2018
This is the content required for an introduction to our compressor - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual.
Safety
Dangers
- parts of the machine may become hot during operation
- the machine will not stay off if it has stopped due to a loss of power and the power is restored (blackout, blown fuse, pulled plug)
- compressed air is generated which holds many dangers
- small parts and dirt can fly towards you when blasted
- the airstream can damage eyes, ears and other sensible organs
- blowing air into certain shapes of holes or recesses can generate an unhealthy amount of noise
- a bubble of air in the bloodstream can kill you
- filling unsuitable containers with compressed air can cause them to explode
- no prevention of turning on after loss & restoration of power (keine Anlaufsicherung)
Precautions
- to avoid burns, don't touch any motor parts if the compressor is or has been running in the last 15 minutes
- don't turn the machine off by pulling the plug - press the orange button instead
- wear well-fitting goggles and ear defenders
- wear gloves if you need to blow air at something you are holding
- do not point any air tools and nozzles at yourself or other people - we have a shop vac for cleaning!
- do not use if you have any open wounds
- do not fill any containers (tires etc.) if they appear damaged, and never above their pressure rating
- if the power has been lost for whatever reason, always press the orange button into the "off" position before restoring it!
Practical Demonstration
- connecting and disconnecting the couplings
- setting a defined pressure, e.g. 4 bar for bike tires or the blast cabinet