User:Micha: Difference between revisions

From CoMakingSpace Wiki

(more steps and details)
(Moved laser-engraved photo to its own project page)
 
(8 intermediate revisions by the same user not shown)
Line 19: Line 19:
** Steps:
** Steps:
**# Use PowerPoint to create samples of my daughter's name in different fonts.
**# Use PowerPoint to create samples of my daughter's name in different fonts.
**# Have multiple rounds of voting on her favorite representations of her name to find her favorite one.  Of course, she picked the most fancy-looking and curly font (see screenshot).
**# Have multiple rounds of voting on her favorite representations of her name to find her favorite one.  Of course, she picked the most fancy-looking and curly font (see screenshot):
**#: [[File:Font selection for name plate.png|alt=Screenshot of PPT file with name in different fonts. With different-sized hearts showing how much my daughterliked it.|Screenshot of the PPT file used to find the best font for my daughter's name. I used her name in the original file. Just changed it to something generic for the wiki.|500px]]
**# Convert winner name to SVG.
**# Convert winner name to SVG.
**# Import in Inkscape, add a border.
**# Import in Inkscape, add a border.
Line 26: Line 27:
**## Cut: the centers of the letters are not connected to anything so they fall out. Doesn't look good.
**## Cut: the centers of the letters are not connected to anything so they fall out. Doesn't look good.
**## Engraving the name gives a nice result (cut the border, of course). Just some smoke resdiue on the surface.
**## Engraving the name gives a nice result (cut the border, of course). Just some smoke resdiue on the surface.
**## To remove discoloring around the name, sand the surface with some sand paper (by hand).  [[File:Font selection for name plate.png|alt=Screenshot of PPT file with name in different fonts. With different-sized hearts showing how much my daughterliked it.|thumb|Screenshot of the PPT file used to find the best font for my daughter's name. I used her name in the original file. Just changed it to something generic for the wiki.]]
**## To remove discoloring around the name, sand the surface with some sand paper (by hand).   
** Further options: Paint or spray or give a finish in some other way.
** Further options: Paint or spray or give a finish in some other way.
* Laser-cut product logo into a piece of 4mm plywood. It's about A3 size and can be used to draw the complex logo onto a whiteboard or flipchart.
* Laser-cut product logo into a piece of 4mm plywood. It's about A3 size and can be used to draw the complex logo onto a whiteboard or flipchart.
Line 36: Line 37:
* 3D printed broken Flowbee adapter
* 3D printed broken Flowbee adapter
** First with original version by [https://www.thingiverse.com/thing:5319041/files daschi]. It was almost robust enough with 100% infill and PLA - almost ;-)
** First with original version by [https://www.thingiverse.com/thing:5319041/files daschi]. It was almost robust enough with 100% infill and PLA - almost ;-)
** Created a derivative version with [https://www.tinkercad.com/ Autodesk Tinkercad]. Just added more material at the most fragile part. -> yet to be printed :-)
** Created a derivative version with [https://www.tinkercad.com/ Autodesk Tinkercad]. Just added more material at the most fragile part. That worked.
* Laser-cut and engraved stylized paper flowers to put around play-doh containers.
* Laser-cut and engraved stylized paper flowers to put around play-doh containers.
* Laser-engraved photo for the [[Members Wall]]: See project page [[Project:Laser-engraved Photo for Members Wall]]


=== in process ===
=== in process ===


* "Unicorn" game based on designs that my daughter and I made.
* "Unicorn" game based on designs that my daughter and I made.
* photo for the [[Members Wall]]
** Follow guide on Members wall page to create word document
** Add black-and-white photo
** Turn the Word file into a JPG:
*** remove table borders in Word (the following step will mess these up, somehow),
*** select everything and copy-paste "as a picture" into PowerPoint (on an empty slide),
*** in PowerPoint, you may want to add a new border,
*** select everything, then right-click and "Save As Picture..."
** Drop resulting JPG onto laser file share, etc.
** Follow steps on [[Laser Engraving Photos]]
** Experiment with laser cutter to engrave on Poplar Plywood with these settings:


=== ideas ===
=== ideas ===

Latest revision as of 17:08, 27 September 2024

about me

Hullo fellow makers!

I'm a computer scientist turned user experience designer living in Nußloch.

Pronouns: he/him

interests

Everything 😅

I'm still exploring the space. I can imagine I'll find a couple of useful things around the household, regarding home automation (mainly Homematic IP right now), musical instruments (bass guitar / guitar) or repairing electronics. Or anything that leads to some cool or fun stuff for my kids (5 and 7 years old).

Besides that, feel free to chat with me about Terry Pratchett, politics, computer games, management, parenting... really about anything but soccer or beer.

projects

done:

  • A laser-cut of my daughter's name for the door of her new room.
    • Steps:
      1. Use PowerPoint to create samples of my daughter's name in different fonts.
      2. Have multiple rounds of voting on her favorite representations of her name to find her favorite one. Of course, she picked the most fancy-looking and curly font (see screenshot):
        Screenshot of PPT file with name in different fonts. With different-sized hearts showing how much my daughterliked it.
      3. Convert winner name to SVG.
      4. Import in Inkscape, add a border.
      5. Export as DXF (on the same machine as PPT, Inkscape so it knows the font).
      6. Try out a few ways to cut this into a piece of poplar plywood (4mm):
        1. Cut: the centers of the letters are not connected to anything so they fall out. Doesn't look good.
        2. Engraving the name gives a nice result (cut the border, of course). Just some smoke resdiue on the surface.
        3. To remove discoloring around the name, sand the surface with some sand paper (by hand).
    • Further options: Paint or spray or give a finish in some other way.
  • Laser-cut product logo into a piece of 4mm plywood. It's about A3 size and can be used to draw the complex logo onto a whiteboard or flipchart.
  • Laser-cut stylized christmas tree ornaments with product logo.
  • Laser Cutter: A more or less 3D robot to be put together during a treasure hunt at my daughter's birthday party.
    • Designed in Autodesk Fusion (after the fantastic Seminar here in the space).
    • Exported to DXF files via the free plug-in DXF for Laser. Exported all relevant faces individually.
    • Use File Drop to get (zipped) files to Laser PC.
  • 3D printed broken Flowbee adapter
    • First with original version by daschi. It was almost robust enough with 100% infill and PLA - almost ;-)
    • Created a derivative version with Autodesk Tinkercad. Just added more material at the most fragile part. That worked.
  • Laser-cut and engraved stylized paper flowers to put around play-doh containers.
  • Laser-engraved photo for the Members Wall: See project page Project:Laser-engraved Photo for Members Wall

in process

  • "Unicorn" game based on designs that my daughter and I made.

ideas

  • Several contraptions to put multiple prints of photos on a concrete wall without drilling holes for each and every one of them.
  • Maybe several picture frames as well.
  • Our family name as a sign on the outside wall next to our front door. There are already holes there from the previous owner which I could use to attach it to the insulation.
  • more to come 🤓

machines I've had an introduction to

contact me

You can reach me via Special:EmailUser/Micha.

Retrieved from "https://wiki.comakingspace.de/index.php?title=User:Micha&oldid=18088"