Network: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) m (New setup) |
NitramLegov (talk | contribs) m (subgraph WLAN) |
||
| Line 1: | Line 1: | ||
The network at the CoMakingSpace is built up as follows:<mermaid> graph LR | The network at the CoMakingSpace is built up as follows: | ||
<mermaid> graph LR | |||
subgraph LAN | subgraph LAN | ||
A --> H[Office Router] | A --> H[Office Router] | ||
A --> I[HomeAssistant] | A --> I[HomeAssistant] | ||
A[CommonRoom Fritz!Box] --> B[E-Room Access Point] | |||
end | end | ||
subgraph E-Room-LAN | subgraph E-Room-LAN | ||
| Line 9: | Line 10: | ||
B --> WCNC2(Workbee CNC Tablet) | B --> WCNC2(Workbee CNC Tablet) | ||
end | end | ||
subgraph WLAN | |||
A -.-> D(Laser PC) | A -.-> D(Laser PC) | ||
A -.-> E(Slicing PC) | A -.-> E(Slicing PC) | ||
A -.-> F(P7) | A -.-> F(P7) | ||
A -.-> G(P8) | A -.-> G(P8) | ||
end | |||
</mermaid> | </mermaid> | ||
Revision as of 23:12, 26 July 2024
The network at the CoMakingSpace is built up as follows:
The main Fritz!Box provides IPs within the 10.0.0.0/8
The DHCP Server provides dynamic IP adresses for clients in the range 10.100.0.0 - 10.100.255.255
All other IP Adresses are static adresses and listed below
Network Infrastructure
| Device | IP |
|---|---|
| Common Room Fritz!Box | 10.0.0.1 |
| Office Fritz!Box | 10.0.0.2 |
| E-Room Access Point | none |
| Device | IP |
|---|---|
| Homeassistant | 10.1.0.1 |
| Buzzer - Common Room to Workshop | |
| Buzzer - Common Room to E-Room | |
| Buzzer - Common Room to Storage | |
| Buzzer - E-Room to Workshop | |
| Buzzer - Workshop to E-Room | |
| Shelly - RouterTable (COMS00154) | 10.1.0.6 |
| Shelly - Felder AF 14 (COMS00073) | 10.1.0.7 |
| Shelly - Festool CTM26 E AC (COMS00021) (Chip) | 10.1.0.8 |
| Shelly - Record Power AC400 (COMS00159) | 10.1.0.9 |
| Shelly - Record Power AC400 (COMS00158) | 10.1.0.10 |
Machines
| Device | IP |
|---|---|
| Laser PC | 10.2.0.1 |
| Slicing PC | 10.2.0.2 |
| Workbee CNC Router | 10.2.0.3 |
| Workbee CNC Tablet | 10.2.0.4 |
| BambuLab (P7) | 10.2.0.5 |
| BambuLab (P8) | 10.2.0.6 |
| LaserJet Laserprinter | |
Configuration Changes
If you need to change settings for the FritzBox Router (providing the CoMakingSpace network) or any of the Raspberry Pis, please contact Martin. |}
