Resawing: Difference between revisions
From CoMakingSpace Wiki
Created page with "thumb|right|resawing a very thin board which will become the bottom of a [[Project:Würfelturm|special bandsaw box]] Resawing is the process of cutting a piece of wood lengthwise across its thickness. Sounds complicated? Try "cutting one board into two thinner boards" ;-) For Maker projects, the machines you resaw with are typically bandsaws or table saws. Further reading: [https://www.finepowertools.com/saws/resawing/ FineP..." |
(No difference)
|
Revision as of 19:56, 24 January 2024
Resawing is the process of cutting a piece of wood lengthwise across its thickness. Sounds complicated? Try "cutting one board into two thinner boards" ;-)
For Maker projects, the machines you resaw with are typically bandsaws or table saws.
Further reading: FinePowerTools.com - Resawing]
