Screwdriver Bits

ToolInfoBox Screwdriver Bits
Synonyms:	DE: Schraubeinsätze, Schrauberbits
Type:	bit
Material:	screws
Location:	Wood Workshop (above drilling table)
Access Requirements:	read this page

our set of bits for typical wood screws

Screwdriver bits are interchangeable tips for hex bit screwdrivers. You can use them with a cordless drill but not with the drill press and most corded drills as these applies way too much torque and speed! The cordless drill should always be used with medium to low torque setting and a low speed (1st gear) at least at the beginning.

Please also be aware that only special impact bits should be used with an impact driver (Schlagschrauber)! If in doubt, always disable the impact function or you will quickly damage the bit.

When mounting long bits (or short bits with a bit holder) into a chuck, make sure that the chuck teeth are centered on the flat sides of the bit when tightened or you will lose or damage the bit.

1/4" Hex Drive Bits

These are the "typical" screwdriver bits you probably know from your own toolbox. The list below shows which ones you should be able to find in the Space - quantities may not interest you, but here you can quickly check whether a certain drive is available or whether you should bring (or donate) that bit yourself!

Size	Screw Symbol	Screw Type	Quantity
PH1		Phillips	2x short
PH2		Phillips	4x short
PH3		Phillips	2x short
PZ0		Pozidriv	1x short
PZ1		Pozidriv	2x short
PZ2		Pozidriv	4x short
PZ3		Pozidriv	2x short
3 mm		slotted	1x short
4 mm		slotted	1x short
4.5 mm		slotted	1x short
5 mm		slotted	1x short
5.5 mm		slotted	1x short
6 mm		slotted	1x short
6.5 mm		slotted	1x short
7 mm		slotted	1x short
8 mm		slotted	1x short
T8		Torx	1x short
T10		Torx	2x short
T15		Torx	2x short
T20		Torx	2x short
T25		Torx	3x short
T27		Torx	1x short
T30		Torx	2x short
T40		Torx	1x short
2 mm		hex socket	1x short
3 mm		hex socket	1x short
4 mm		hex socket	1x short
5 mm		hex socket	1x short
6 mm		hex socket	1x short
8 mm		hex socket	1x short
5 mm		Double Hex	1x short
6 mm		Double Hex	1x short
8 mm		Double Hex	1x short

Bit Holders

Bit holders (DE: Bithalter) are necessary to mount short-shaft bits into a power driver such as a cordless drill but may also add functionality to a handheld bit screwdriver. For instance, there are quick-release holders, such with a strong magnet for one-handed operation, and simple extension pieces without any extras.