Pricking Awls: Difference between revisions

From CoMakingSpace Wiki

(Created page with "{{ToolInfoBox |tool name=Pricking Awls |image=pricking awl.JPG |synonyms=DE: Vorstecher, Spitzbohrer |type=hand tool |material=wood |used with=drills |location=Drill...")
 
m (German)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{ToolInfoBox
{{ToolInfoBox
|tool name=Pricking Awls
|tool name=Pricking Awls
|image=pricking awl.JPG
|german=Vorstecher|image=pricking awl.JPG
|synonyms=DE: Vorstecher, Spitzbohrer
|synonyms=scratch awls; DE: Vorstecher, Spitzbohrer
|type=hand tool
|type=[[marking]] tool
|material=[[wood]]
|material=[[leather]], [[wood]]
|used with=[[drills]]
|used with=[[drills]]
|location=[[Drilling Table|drilling table]]
|location=[[Location::Wood Workshop]] (at [[Location::Drilling Table|drilling table]])
|access=upon reading
|access=read this page
|tutors=
|tutors=
|manual=
|manual=
|donation=
|donation=
|similar=[[Center Punch|center punch]]
|similar=other [[awls]], [[Marking Knives|marking knives]],<br>[[Center Punches|center punches]], [[scribers]]
}}
}}
Use a pricking awl to mark hole locations in [[wood]] so a [[Wood Drill Bits|wood drill bit]] or a self-tapping [[Wood Screws|wood screw]] will have a place to start!
A pricking awl is basically a round steel rod sharpened to a fine tip. Use it to puncture [[leather]] in preparation for sewing or scratch cut lines into leather or wood.


Simply push the awl into your workpiece at the desired spots - and pull it out again ;-)
You ''can'' also mark hole locations in [[wood]] so a [[Wood Drill Bits|wood drill bit]] or a self-tapping [[Wood Screws|wood screw]] will have a place to start. In this case, make sure to only push the awl ''lightly'' into your workpiece at the desired spots or the wood may split.
 
For much more efficient screw starting holes than can securely be reamed by twisting the awl, you should use a square-tipped [[Birdcage Awl|birdcage awl]] instead!<sup> [http://www.inthewoodshop.com/ShopMadeTools/BirdcageAwl.html]</sup>




[[Category:Marking & Measuring]]
[[Category:Marking & Measuring]]
[[Category:Woodworking]]
[[Category:Woodworking]]

Latest revision as of 16:48, 29 May 2022

ToolInfoBox

Pricking Awls

Pricking awl.JPG
Synonyms: scratch awls; DE: Vorstecher, Spitzbohrer
Type: marking tool
Material: leather, wood
Used with: drills
Location: Wood Workshop (at drilling table)
Access Requirements: read this page
Similar (More or Less): other awls, marking knives,
center punches, scribers

A pricking awl is basically a round steel rod sharpened to a fine tip. Use it to puncture leather in preparation for sewing or scratch cut lines into leather or wood.

You can also mark hole locations in wood so a wood drill bit or a self-tapping wood screw will have a place to start. In this case, make sure to only push the awl lightly into your workpiece at the desired spots or the wood may split.

For much more efficient screw starting holes than can securely be reamed by twisting the awl, you should use a square-tipped birdcage awl instead! [1]