Centerline Gauge: Difference between revisions
From CoMakingSpace Wiki
(stub from Telegram message) |
(InfoBox & Categories) |
||
| Line 1: | Line 1: | ||
[[Keno]] built a centerline gauge for the space. It lives in the drilling | {{ToolInfoBox | ||
|tool name=Centerline Gauge | |||
|german=Mittenfinder | |||
|image= | |||
|synonyms=center finder, center marker, center scriber;<br>DE: Mittenfinder, Mittenmarkierer, "Zentrierwerkzeug" | |||
|type=[[marking]] tool | |||
|status= | |||
|material=[[wood]] (long, straight pieces) | |||
|used with=[[pencil]] | |||
|location=[[Location::Wood Workshop|wood workshop]] (above drilling table) | |||
|access= | |||
|tutors= | |||
|manual= | |||
|donation= | |||
|similar=[[Marking Gauge|marking gauge]] | |||
}} | |||
[[Keno]] built a centerline gauge for the space. It lives in the drilling area. | |||
The aluminium rods can be set in a narrower and a wider setting for different beam widths. It's accurate to roughly 1 mm, with most of the error stemming from how well the pencil tip is centered in the hole. | The aluminium rods can be set in a narrower and a wider setting for different beam widths. It's accurate to roughly 1 mm, with most of the error stemming from how well the pencil tip is centered in the hole. | ||
Hey, you could always [[Project:MicroTrees|ask Luzian to precision-sharpen a pencil]] for best results! ;-) | |||
[[Category:Marking & Measuring]] | |||
[[Category:Self-Made Tools]] | |||
[[Category:Woodworking]] | |||
Revision as of 11:14, 27 November 2021
| ToolInfoBox Centerline Gauge | |
|---|---|
| |
| Synonyms: | center finder, center marker, center scriber; DE: Mittenfinder, Mittenmarkierer, "Zentrierwerkzeug" |
| Type: | marking tool |
| Material: | wood (long, straight pieces) |
| Used with: | pencil |
| Location: | wood workshop (above drilling table) |
| Similar (More or Less): | marking gauge |
Keno built a centerline gauge for the space. It lives in the drilling area.
The aluminium rods can be set in a narrower and a wider setting for different beam widths. It's accurate to roughly 1 mm, with most of the error stemming from how well the pencil tip is centered in the hole.
Hey, you could always ask Luzian to precision-sharpen a pencil for best results! ;-)
