Welding Area
We have set up a ventilated welding area in the "hot" section of our metal workshop.
Curtains
The curtains are meant to protect the other Makers while someone is welding inside of the enclosure. Two (black) are made of non-flammable cotton fabric (Bühnenmolton B1, 300 g/m²) and can be placed close to the welding process if needed. The third one (red) is transparent and should cover the entrance of the entire enclosure whenever someone is welding.
Improvement Ideas
- the black curtains could get a more or less fixed rail system in the near future based on their actual use
- the red "entrance" curtain could use a sliding mechanism so it is not just rolled up and stored on top of the wall when not in use
Welding Table
We brought the sturdy green steel table (formerly a DIY table saw) out of the metal workshop and welded a vise to it.
For ease of transport (although it should probably stay outside in the long term), we welded two coasters to its base so you can roll it around when one side is lifted.
This is not a proper welding workbench, but the best we have at the moment. As always, improvements are very welcome ;-)
Machines
Welding Transformer
Other Tools
Welding Gloves
Welding Helmets
