Project:Pizza Peel: Difference between revisions
From CoMakingSpace Wiki
(Created page with "I want to make two simple pizza peels out of birch multi-ply. This should be a nice chance to try spiral-toothed scroll saw blades. == Design == Based on...") |
(No difference)
|
Revision as of 22:12, 26 June 2018
I want to make two simple pizza peels out of birch multi-ply.
This should be a nice chance to try spiral-toothed scroll saw blades.
Design
Based on a peel and stone that I already have and the box it should fit in, these are the desired measurements:
- thickness: 5 mm
- handle: approx. 12 × 4 cm
- surface: approx. 35 × 30 cm (wider than long)
- front edge: chamfered for 12 mm
Make
- TBD -
- cut
- chamfer
- sand