Project:Basement Boot Rack
| ProjectInfoBox Basement Boot Rack | |
|---|---|
| |
| Status: | WIP |
| Release Date: | 12-09-2023 |
| Initiator: | Adam F |
| Materials Used: | Scrap Bed Slats, M10 Threaded Rod & Nuts, leftover 50x30mm softwood |
| Tools Used: | Tablesaw, Drillpress, Quick Clamps, Hacksaw, Files, 17mm Spanner |
| Approx. Cost: | WIP |
This project was born out of the need to reclaim some space in our apartment and our section of the basment.
Currently our dirty shoes and boots take up a lot of space in the hallway or on shelves that are better suited holding other things.
Acknowledgements
Thanks to Ciaran, Lukas, Keno and Johannes for the conversations and suggesting different approaches that might be best for this project. See below for how it went.
The Process
Inspiration
"Honey, all of your shoes that you brough with you are taking up too much space on my shelves. I had an idea, maybe we get a shoe rack to put in the basement. Oh and since you are not working yet would you want to make one? You could use up that material that was left over after you fixed that other thing! I think something "simple" like my parents have in the hallway would be perfect!"
The gallery of progress photos because reading is hard...
I thought this would be enough material
I found scrap materials that might work with my idea
new idea and started to make it happen
scrap was all different lengths, and needed to be cut
Rough layout, with a second shelf on top
Another night, more conversations and stability was brought up
attempting to layout the curent idea of joining all the pieces
not happy with the execution of the idea. more conversations needed
new idea from other conversations. Use threaded bar/ or just rods
mark up for drilling
make sure you set your speed right
lots and lots of drilling later
you get holes that should line up... ish
cut thr rods and file the ends. (there was close to 1m length of M10 rod left and i left it in the worshop to be used by someone else. it is still there as of 11.10.23)
figure out how to assemble this thing... again
drilled holes in the legs, and made a rough assmebly. found some things to improve through another conversation
the legs were really rough. I got an introduction to the handplanes and made them smoother
after assmebly in my flat with the new changes. it was not stable. Had to use the X, but instead of wood used steel wire.
made feet from the remaining nuts
The finished Project
Making it happen...
- Looked at the end location
- Got some rough dimensions
- Thought about how to make it happen
- Brought material to the space
- Had conversations about project
- Looked in the scrap at the CoMakingSpace when I realized I didnt have enough material
- Had conversations about project
- Thought about those conversations and what to do next
- Got new tool intros
- Actually did a bit of work
- Didnt like some of the work I had done
- Had some more conversations
- Went to Bauhaus and bought some threaded rod and nuts
- Did some more work
- Was a lot happier with that work
- Started to put things together
- Was extremely tedious.... took forever
- Had a rough idea of what it was going to be like finished
- Had more conversations
- Needed to buy more nuts...
- Needed another tool intro to make the thing look nicer
- Brought it home
- Had a conversation with the boss.
- Now waiting for the boss to bring more material, as per the discussion.
- The boss forgot the materials from home.
- I bought those materials from BAUHAUS
- I finished the project.
