Project:ArcadeMachine: Difference between revisions

From CoMakingSpace Wiki

Line 40: Line 40:
!colspan="5"|Support Cabinet
!colspan="5"|Support Cabinet
|-
|-
| || 2 || MDF 1100x1000x16 mm || Bauhaus || 50 €
| || 2 || MDF 1100x1000x16 mm || [https://www.bauhaus.info/zuschnittplatten/mdf-platte-nach-mass/p/14470894 Bauhaus] || 50 €
|-
|-
| || 1 || MDF 1400x800x16 mm || Bauhaus || 20 €
| || 1 || MDF 1400x800x16 mm || [https://www.bauhaus.info/zuschnittplatten/mdf-platte-nach-mass/p/14470894 Bauhaus] || 20 €
|-
|-
| || 4 || Framing Lumber 2000x24x48 mm || Bauhaus || 8 €
| || 4 || Framing Lumber 2000x24x48 mm || [https://www.bauhaus.info/latten-rahmen/holzlatte/p/14416236 Bauhaus] || 8 €
|-
|-
| || 500 || Screws 4x35 mm; partial threaded || Bauhaus || 20 €
| || 500 || Screws 4x35 mm; partial threaded || [https://www.bauhaus.info/holzschrauben-spanplattenschrauben/spax-universalschraube-t-star-plus/p/10013028 Bauhaus] || 20 €
|-
|-
| || 2 || Hinge with built-in damper; full-overlay (Innenanschlag) || amazon.de || 11 €
| || 2 || Hinge with built-in damper; full-overlay (Innenanschlag) || [https://www.amazon.de/LIVING-TEC-Standardgr%C3%B6%C3%9Fe-T%C3%BCrscharniere-Schrankscharnier-%C3%96ffnungswinkel/dp/B0BMFC4BCG amazon.de] || 11 €
|-
|-
| || 8 || Rubber feet; 38x10 mm || amazon.de || 7 €
| || 8 || Rubber feet; 38x10 mm || [https://www.amazon.de/Adam-Hall-Hardware-4906-M8/dp/B00SJFDOTC amazon.de] || 7 €
|-
|-
!colspan="5" | Electronics
!colspan="5" | Electronics
|-
|-
| || 1 || ED-STARTS Arcade Kit: 2xJoystick; 20xButtons; 2xUSB encoder || [[https://www.amazon.de/EG-STARTS-Klassische-M%C3%B6glichkeiten-Leuchttaste/dp/B06WWRKGGD|amazon.de]] || 50 €
| || 1 || ED-STARTS Arcade Kit: 2xJoystick; 20xButtons; 2xUSB encoder || [https://www.amazon.de/EG-STARTS-Klassische-M%C3%B6glichkeiten-Leuchttaste/dp/B06WWRKGGD amazon.de] || 50 €
|-
|-
| || 1 || Screen; ASUS 24" (VK248H) || ebay-kleinanzeigen.de || 20 €
| || 1 || Screen; ASUS 24" (VK248H) || ebay-kleinanzeigen.de || 20 €
|-
|-
| || 1 || RaspberryPi 400 || [[https://www.welectron.com/Raspberry-Pi-400_1|welectron.com]] || 90 €
| || 1 || RaspberryPi 400 || [https://www.welectron.com/Raspberry-Pi-400_1 welectron.com] || 90 €
|-
|-
| || 1 || USB-C PSU 5.1V / 3A || [[https://www.welectron.com/Official-Raspberry-Pi-4-Power-Supply-USB-C-51V-3A-White-EU|welectron.com]] || 8 €
| || 1 || USB-C PSU 5.1V / 3A || [https://www.welectron.com/Official-Raspberry-Pi-4-Power-Supply-USB-C-51V-3A-White-EU welectron.com] || 8 €
|-
|-
| || 1 || SanDisk Ultra microSD 128 GB || [[https://www.welectron.com/SanDisk-Ultra-microSD-Card-128-GB|welectron.com]] || 14 €
| || 1 || SanDisk Ultra microSD 128 GB || [https://www.welectron.com/SanDisk-Ultra-microSD-Card-128-GB welectron.com] || 14 €
|-
|-
| || 1 || Micro-HDMI to HDMI Kabel || [[https://www.welectron.com/Official-Raspberry-Pi-4-micro-HDMI-Cable-10m-White|welectron.com]] || 6 €
| || 1 || Micro-HDMI to HDMI Kabel || [https://www.welectron.com/Official-Raspberry-Pi-4-micro-HDMI-Cable-10m-White welectron.com] || 6 €
|-
|-
| || 1 || Micro-HDMI to HDMI Adapter || [[https://www.amazon.de/UGREEN-Adapterkabel-verl%C3%A4ngerungskabel-vergoldete-unterst%C3%BCtzt-Schwarz/dp/B00B2HORKE|amazon.de]] || 8 €
| || 1 || Micro-HDMI to HDMI Adapter || [https://www.amazon.de/UGREEN-Adapterkabel-verl%C3%A4ngerungskabel-vergoldete-unterst%C3%BCtzt-Schwarz/dp/B00B2HORKE amazon.de] || 8 €
|-
|-
| || 1 || 4-Port USB 3 Hub || [[https://www.amazon.de/PHIXERO-Verteiler-Datenhub-MacBook-Notebook/dp/B0BPSFKR5H|amazon.de]] || 8 €
| || 1 || 4-Port USB 3 Hub || [https://www.amazon.de/PHIXERO-Verteiler-Datenhub-MacBook-Notebook/dp/B0BPSFKR5H amazon.de] || 8 €
|-
|-
| || 1 || USB 3 & HDMI extension Dash Panel || [[https://www.amazon.de/USB3-0-Extension-Wasserdichte-Unterputzkabel-Motorrad/dp/B0794Z5W8C/260-3819260-0041701?psc=1|amazon.de]] || 15 €
| || 1 || USB 3 & HDMI extension Dash Panel || [https://www.amazon.de/USB3-0-Extension-Wasserdichte-Unterputzkabel-Motorrad/dp/B0794Z5W8C/260-3819260-0041701?psc=1 amazon.de] || 15 €
|-
|-
| || 2 || USB 3 extension Dash Panel || [[https://www.amazon.de/Panel-Flush-Bolongking-Extension-Motorcycle/dp/B06XHV51ZB/260-3819260-0041701?psc=1|amazon.de]] || 22 €
| || 2 || USB 3 extension Dash Panel || [https://www.amazon.de/Panel-Flush-Bolongking-Extension-Motorcycle/dp/B06XHV51ZB/260-3819260-0041701?psc=1 amazon.de] || 22 €
|-
|-
| || 1 || Kaltgerätekabel (unten gewinkelt) || [[https://www.amazon.de/DINIC-Stromkabel-Netzkabel-abgewinkelt-gewinkelt-schwarz/dp/B07MV1BNM9|amazon.de]] || 7 €
| || 1 || Kaltgerätekabel (unten gewinkelt) || [https://www.amazon.de/DINIC-Stromkabel-Netzkabel-abgewinkelt-gewinkelt-schwarz/dp/B07MV1BNM9 amazon.de] || 7 €
|-
|-
| || 1 || Power switch || [[https://www.amazon.de/Netzbuchse-Eingangsmodul-Wippenschalter-Einlassmodulstecker-Verkabelung/dp/B09TXPS559|amazon.de]] || 8 €
| || 1 || Power switch || [https://www.amazon.de/Netzbuchse-Eingangsmodul-Wippenschalter-Einlassmodulstecker-Verkabelung/dp/B09TXPS559 amazon.de] || 8 €
|-
|-
| || 4 || Kistenverschluss || [[https://www.amazon.de/Spannverschluss-Edelstahl-Hebelverschluss-Kistenverschluss-Kappenschloss/dp/B09NN3YNM1|amazon.de]] || 6 €
| || 4 || Kistenverschluss || [https://www.amazon.de/Spannverschluss-Edelstahl-Hebelverschluss-Kistenverschluss-Kappenschloss/dp/B09NN3YNM1 amazon.de] || 6 €
|-
|-
|}
|}

Revision as of 16:03, 13 May 2023

ProjectInfoBox

Arcade Machine

ArcadeMachine.png
Status: Work in Progress
Initiator: Lorenz
Materials Used: MDF, Framing Lumber, Electronics
Software Used: FreeCAD 0.19
Approx. Cost: >300 €


This is my first project and it is work in progress so this page is also very much not finished.

Introduction

The idea is to build an Arcade Machine also known as Arcade Cabinet. Think of an old Pac-Man machine. "Insert Coin"... "New Player"... that kind of stuff.

I designed the cabinet in two parts. An upper part that houses the computer, the buttons and joysticks, the screen, and the speakers. The bottom part is is just the support to bring the upper part to the right height and then also serves as storage. The two parts are held together by four screws.

The cabinet is almost completely build from 16mm MDF and with the exception of the bezel around the screen which is only 3mm. Since MDF is not well suited for being screwed together and I put 24mm x 48mm framing lumber in the corners to screw into.

For the electronics I wanted a Raspberry Pi 4 but unfortunately due to the current (2023) chip shortage this is not readily available or only at unreasonably inflated prices. As an alternative I bought a Raspberry Pi 400 which is essentially the same hardware in a different form factor with a heat sink and a keyboard for the same price tag. And it has the great advantage that it is readily available from several vendors. Including a 5.1V 3A USB-C power supply, a micro HDMI to HDMI cable and a 128 GB micro SD card this set me back ~100 €.

The screen is a ASUS 24" (VK248H) that I picked up from ebay-kleinanzeigen for 20€.

The buttons and joysticks I bought an amazon from EG-STARTS as a 2 player kit which comes with 2 joysticks 20 buttons and the electronics to connect it via USB all together for 50€.

...to be continued.

Materials List

ID Quantity Description Source Total Price
Support Cabinet
2 MDF 1100x1000x16 mm Bauhaus 50 €
1 MDF 1400x800x16 mm Bauhaus 20 €
4 Framing Lumber 2000x24x48 mm Bauhaus 8 €
500 Screws 4x35 mm; partial threaded Bauhaus 20 €
2 Hinge with built-in damper; full-overlay (Innenanschlag) amazon.de 11 €
8 Rubber feet; 38x10 mm amazon.de 7 €
Electronics
1 ED-STARTS Arcade Kit: 2xJoystick; 20xButtons; 2xUSB encoder amazon.de 50 €
1 Screen; ASUS 24" (VK248H) ebay-kleinanzeigen.de 20 €
1 RaspberryPi 400 welectron.com 90 €
1 USB-C PSU 5.1V / 3A welectron.com 8 €
1 SanDisk Ultra microSD 128 GB welectron.com 14 €
1 Micro-HDMI to HDMI Kabel welectron.com 6 €
1 Micro-HDMI to HDMI Adapter amazon.de 8 €
1 4-Port USB 3 Hub amazon.de 8 €
1 USB 3 & HDMI extension Dash Panel amazon.de 15 €
2 USB 3 extension Dash Panel amazon.de 22 €
1 Kaltgerätekabel (unten gewinkelt) amazon.de 7 €
1 Power switch amazon.de 8 €
4 Kistenverschluss amazon.de 6 €

Log Book

Day 1

  • Buying materials:
    • 2x MDF 1100x1000x16 mm
    • 1x MDF 1400x800x16 mm
    • 4x Framing Lumber 2000x24x48 mm
    • 500 Screws 4x35 mm partial threaded
  • Instructions for Reciprocating Saw

Day 2

  • Marking cut lines on the boards
  • Instruction for handheld circular saw

Day 3

Day 4