Oscillating Tool Introduction
From CoMakingSpace Wiki
This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!
This is the content required for an introduction to our oscillating tool - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual.
Safety
Dangers
An oscillating tool is basically a fast moving tool with different attachments for cutting, rasping or sanding. Therefore, similar dangers as with power saws or sanders exist:
- sawdust and small splinters can fly towards the operator and others
- when cutting into metal, sparks can be generated and fly towards the operator
- medium amount of noise, but close to the operator's head
- no prevention of turning on after loss & restoration of power (keine Anlaufsicherung)
- attachments might bind with the material if used too forcefully, causing excessive wear of the attachments and vibrations in the handle
Precautions
- wear goggles to protect your eyes from sparks, splinters and other things flying around
- wear ear defenders
- wear gloves
- ensure you are using the proper attachment for the material you are working with
- ensure the attachment is securely connected to the tool's head
- ensure the material is well attached to a solid surface
- if the power has been lost for whatever reason, always switch the power switch to "OFF" before restoring it!
- use only very little pressure and let the rapid oscillation do the work!
Demonstration
The tutor will show you these steps in detail:
- how to operate the oscillating tool
- how to change the attachment ("Starlock" system or adapter + screws)
