Handheld Sander Introduction

This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!

---

This is the content required for an introduction to our handheld sanders - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

Let's begin! First off, make sure you have read the machine's manual (should be linked from its wiki page).

Safety

Dangers

• lots of fine dust from wood or plastics - can irritate lungs and skin
• sparks from metal
• powerful movements can make the workpiece shift (or fly!) and let a handheld sander "run away"
• some of the sanders have no prevention of turning on after loss & restoration of power (keine Anlaufsicherung)

Precautions

• wear a dust mask and long clothes if your material generates hazardous dust
• sand outside if you can't connect a shop vac or fine filter
  • when sanding metal, do NOT connect dust collection - the sparks could cause a fire!
• wear goggles when working with metal or small workpieces
• secure your workpiece and exert a firm grip on the tool
• check for a clean run and fit of the sanding medium before you start
• let the tool get to full speed before contacting your workpiece and start with light pressure
• make sure the tool is turned off before plugging it in
• do not blow the workpiece clean when you're done, best clean it with a moist towel

Suggested Reading

Besides these safety notes, you should read the page about dust to get a better conception of the dangers associated with some materials! Remember, you are responsible for the material you choose and for protecting yourself.