Difference between revisions of "File:Router table - starting pin.png"

From CoMakingSpace Wiki
Jump to navigation Jump to search
(When working fenceless with a guide-bearing bit on the router table, a starting pin needs to be used for a safe first contact with your workpiece. It helps you make sure your workpiece stays in front of the router bit!)
 
(No difference)

Latest revision as of 16:05, 1 August 2020

Summary

When working fenceless with a guide-bearing bit on the router table, a starting pin needs to be used for a safe first contact with your workpiece.

It helps you make sure your workpiece stays in front of the router bit!

Licensing

This file is licensed under CC-BY-SA 4.0. You are allowed to use and alter this file freely as long as you share it under the same license and attribute the original author(s).

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current16:05, 1 August 2020Thumbnail for version as of 16:05, 1 August 2020853 × 480 (711 KB)Lukas (talk | contribs)When working fenceless with a guide-bearing bit on the router table, a starting pin needs to be used for a safe first contact with your workpiece. It helps you make sure your workpiece stays in front of the router bit!

The following page uses this file:

Metadata