Chop Saw Introduction
From CoMakingSpace Wiki
This is the content required for an introduction to our chop saw - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's [---- manual].
Safety
Dangers
- sawdust and small splinters can fly towards the operator and others
- sharp and rotating exposed blade - will keep spinning for a bit after turning the power off!
Precautions
- hook up a shop vac, but be aware the dust extraction from our "Herkules" saw is very incomplete
- wear goggles and ear defenders!
- dust mask: depending on the material you're cutting
- check whether your planned movement is possible before turning the saw on - there are screws that may lock it in several places
- clamp your workpiece to the saw's base, if possible
- let the saw start before touching the workpiece
- keep your hands well clear of the blade until it has stopped completely
Demonstration
The tutor will show you these steps in detail:
- adjusting the bevel
- adjusting the rotation
- releasing the blade guard and starting the saw
