Archived:Hot Glue Gun Introduction: Difference between revisions
From CoMakingSpace Wiki
(Created page with "This is the content required for an introduction to our hot glue guns - '''reading this does NOT replace the mandatory session with a tutor!''' It will ma...") |
(No difference)
|
Revision as of 17:29, 3 May 2018
This is the content required for an introduction to our hot glue guns - reading this does NOT replace the mandatory session with a tutor! It will make it even quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual.
Safety
Dangers
- the nozzle gets very hot (approx. 200 °C)
- the glue stays hot for a while
- burns are made more serious by the fact that the glue sticks to skin and can't be shaken off
Precautions
- don't touch the nozzle area if there is any chance it could still be hot
- don't touch freshly deposited glue to see if it's hard yet...
- quickly apply cold water if hot glue is stuck to your skin