Air Cleaners: Difference between revisions

Latest revision as of 16:40, 22 April 2024

We have two "Record Power AC400" air cleaners installed in the wood workshop to get rid of fine dust. Please use them while and after you're sanding, working with hardwood, grinding stone, etc - if in doubt, turn it on!

The original remote was replaced by a Shelly button which can be found on the side of the Felder AF 14 dust extractor. The air cleaner is also activated automatically whenever that dust extractor is used and will run for 30 minutes each time.

Filters

Air is cleaned in two stages by a 5 micron prefilter and a 1 micron filter.

Replacement filters should be in the office, please alert someone if you feel a filter might be "full". The inner filter can also be cleaned (see manual)!

@@ Line 2: / Line 2: @@
 [[File:air cleaner remote.jpg|left|100px]]
-The remote can be found on the wall near the [[Chop Saw|chop saw]] and needs to be aimed at the side of the filter that has the status panel.
+The original remote was replaced by a Shelly button which can be found on the side of the [[Felder AF 14]] dust extractor.
-<br clear=left>
+The air cleaner is also activated automatically whenever that dust extractor is used and will run for 30 minutes each time.
-[[File:air cleaner status panel.jpg|left|100px]]
-You can set three different power settings that are indicated by the bottom LEDs (left to right: "Hi", "Mid", "Low") and three different shutdown timers (top LEDs, left to right: 1, 2 and 4 hours).
 <br clear=left>