Handheld Sander Introduction
From CoMakingSpace Wiki
This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!
This is the content required for an introduction to our handheld sanders - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual (should be linked from its wiki page).
Safety
Dangers
- lots of fine dust from wood or plastics - can irritate lungs and skin
- sparks from metal
- powerful movements can make the workpiece shift (or fly!) and let a handheld sander "run away"
- some of the sanders have no prevention of turning on after loss & restoration of power (keine Anlaufsicherung)
Precautions
- wear a dust mask and long clothes if your material generates hazardous dust
- sand outside if you can't connect a shop vac or fine filter
- when sanding metal, do NOT connect dust collection - the sparks could cause a fire!
- wear goggles when working with metal or small workpieces
- secure your workpiece and exert a firm grip on the tool
- check for a clean run and fit of the sanding medium before you start
- let the tool get to full speed before contacting your workpiece and start with light pressure
- make sure the tool is turned off before plugging it in
- do not blow the workpiece clean when you're done, best clean it with a moist towel
Suggested Reading
Besides these safety notes, you should read the page about dust to get a better conception of the dangers associated with some materials! Remember, you are responsible for the material you choose and for protecting yourself.
