Project:Pegboard
From CoMakingSpace Wiki
| ProjectInfoBox Pegboard | |
|---|---|
| |
| Status: | in progress |
| Release Date: | March 2018 |
| Initiator: | Mitja |
| Materials Used: | MDF, Filament |
| Tools Used: | CNC Router, 3D Printer |
| Software Used: | Fusion 360 |
| Approx. Cost: | < 10 EUR |
Typical US pegboards have 1/4 inch diameter holes, with a spacing of 1 inch. These holes can be easily drilled on our Workbee CNC.
Our locker doors allow mounting a sheet of 95cm x 35cm with a small cutout of 5cm x 5cm in the middle of the long edge.
Attachments
Peg attachments can be 3D printed, designs that work well will be collected here.
