Network
From CoMakingSpace Wiki
From a physical perspective, the network at the CoMakingSpace is built up as follows:
The main UCG Ultra provides IPs within the 10.0.0.0/8
The DHCP Server provides dynamic IP adresses for clients in the range 10.100.0.0 - 10.100.255.255
All other IP Adresses are static adresses and listed below
Network Infrastructure
| Device | IP |
|---|---|
| UCG Ultra | 10.0.0.1 |
| Office Fritz!Box | 10.0.0.2 |
| Kitchen Switch | 10.0.0.3 |
| E-Room Switch | 10.0.0.4 |
| Wood Workshop Switch | 10.0.0.5 |
| Seminar Corner Switch | 10.0.0.6 |
| Kitchen AP | 10.0.1.1 |
| Wood Workshop AP | 10.0.1.2 |
| Device | IP |
|---|---|
| Homeassistant | 10.1.0.1 |
| Buzzer - E-Room to Workshop | |
| Buzzer - Workshop to E-Room | |
| Shelly - RouterTable (COMS00154) | 10.1.0.6 |
| Shelly - Felder AF 14 (COMS00073) | 10.1.0.7 |
| Shelly - Festool CTM26 E AC (COMS00021) (Chip) | 10.1.0.8 |
| Shelly - Record Power AC400 (COMS00159) | 10.1.0.9 |
| Shelly - Record Power AC400 (COMS00158) | 10.1.0.10 |
| Logo-LaserAbluft | 10.1.0.11 |
| ESPHome_Garbage_Sign | 10.1.0.12 |
| Trash Tracker | 10.1.0.13 |
| Logo-Felder_RL_160 | 10.1.0.14 |
| LGwebOSTV (Left) | 10.1.0.15 |
| LGwebOSTV (right) | 10.1.0.16 |
Machines
| Device | IP |
|---|---|
| Laser PC | 10.2.0.1 |
| Slicing PC | 10.2.0.2 |
| Workbee CNC Router | 10.2.0.3 |
| Workbee CNC Tablet | 10.2.0.4 |
| BambuLab (P7) | 10.2.0.5 |
| BambuLab (P8) | 10.2.0.6 |
| prusa-link | 10.2.0.8 |
| epilog legend 36ext | 10.2.0.9 |
| Canon MF752Cdw | 10.2.0.10 |
Configuration Changes
If you need to change settings for our Network, please contact Martin.
