Material:Adhesive Tape
Adhesive tapes consist of some kind of backing covered with an adhesive on at least one side.
A good idea before applying any kind of adhesive tape to a smooth surface is to remove any dust and fat, e.g. by wiping it with a few drops of acetone.
Don't know what your type of tape is called? No problem! Click areas in the image on the right to get where you want ->
Keine Ahnung wie die Klebebänder heißen? Kein Problem! Das klickbare Bild rechts führt dich zur richtigen Sorte ->
All Weather Tape
| MaterialInfoBox All Weather Tape | |
|---|---|
| |
| Synonyms: | outdoor tape; DE: Allwetter-Klebeband, witterungsbeständiges Klebeband |
| Suggested Tools: | |
This tape is not perfectly clear but a lot more transparent than it seems when you look at the entire roll. It is pretty thick and can withstand UV radiation and very low or high temperatures better than other kinds of adhesive tape.
Clear Tape
| MaterialInfoBox Clear Tape | |
|---|---|
| |
| Synonyms: | "Scotch tape"; DE: Filmband, Klebefilm, "Tesafilm" |
| Suggested Tools: | shop scissors |
Clear tape is hard to tear and usually cut by a tape dispenser or scissors.
Double Sided Tape
| MaterialInfoBox Double Sided Tape | |
|---|---|
| |
| Synonyms: | double-sided tape, two-way tape; DE: doppelseitiges Klebeband, Doppelklebeband, Verlegeband |
| Suggested Tools: | shop scissors |
Double sided tape consists almost entirely of adhesive and should therefore only be cut with cheap shop scissors. They still need to be cleaned afterwards...
It can be very useful for fixing a workpiece you want to mill.
Duct Tape
| MaterialInfoBox Duct Tape | |
|---|---|
| |
| Synonyms: | duck tape; DE: Gewebeband, "Panzertape" |
| On Site? | yes |
| Suggested Donation: | 10 €/roll |
| Suggested Tools: | hands |
Duct tape (from "duck tape" after the type of sturdy fabric) is a reinforced tape with excellent adhesion and stability properties on many materials. You can tear it by hand, and even though that is harder than with many other tapes scissors should not be used as they would get clogged with adhesive.
The very similar "gaffer tape" is mainly made from fabric instead of artificial polymers and features an adhesive that is more easily removable.
Masking Tape
| MaterialInfoBox Masking Tape | |
|---|---|
| |
| Synonyms: | painter's tape; DE: Malerkrepp, Kreppband |
| On Site? | yes |
| Suggested Donation: | 2.50 €/roll |
| Suggested Tools: | markers, hands |
Masking tape is commonly used for protecting corners or small surfaces when painting or to label things as it is cheap and easily removable without traces. You can easily tear it by hand.
Polyimide Tape
| MaterialInfoBox Polyimide Tape | |
|---|---|
| |
| Synonyms: | "Kapton tape"; DE: Polyimid-Klebeband |
| Suggested Donation: | 15 €/roll |
| Suggested Tools: | shop scissors |
Polyimide tape (commonly called "Kapton" after a brand name) is a very thin insulating tape. It is commonly used on 3D printers with glass or aluminum beds (not our Original Prusa i3 MK2S!) to increase print bed adhesion as it is heat resistant and common printing materials seem to stick to it rather well when it is warm.
Copper Tape
| MaterialInfoBox Copper Tape | |
|---|---|
|
| |
| Synonyms: | or in German? |
| Suggested Tools: | |
Warning: sharp edge!
Copper tape can be used to make electrical connections.
