Project:Dining Room Table: Difference between revisions
From CoMakingSpace Wiki
m (Lukas moved page Dining Room Table to Project:Dining Room Table) |
(Add plans) |
||
| Line 11: | Line 11: | ||
|cost= | |cost= | ||
}} | }} | ||
== Plans == | |||
I'm following the instructions here: | |||
http://www.ana-white.com/2009/12/plans-farmhouse-table-knock-off-of.html | |||
== Tools == | |||
* Tape measure | |||
* Square | |||
* Hammer | |||
* Drill | |||
* Circular saw | |||
* Sanding machine | |||
* Paint brush | |||
== Materials == | |||
* Finish Oil 8 | |||
* Screws | |||
* Wood Glue | |||
* Sandpaper (pieces and for sanding machine) | |||
I also need to find the following wood pieces. These dimensions are in inches: I intend to convert them to cm: | |||
{| | |||
|- | |||
! Description | |||
! Quantity | |||
! Height (inches) | |||
! Width (inches) | |||
! Length (inches) | |||
|- | |||
|Tabletop Pieces | |||
|7 | |||
|2,0 | |||
|6,0 | |||
|81,0 | |||
|- | |||
|Outside Legs, Inside Legs, End Aprons | |||
|10 | |||
|2,0 | |||
|4,0 | |||
|28,5 | |||
|- | |||
|Bottom End Supports for the Stretcher | |||
|2 | |||
|2,0 | |||
|4,0 | |||
|34,5 | |||
|- | |||
|Stretcher, Side Aprons | |||
|3 | |||
|2,0 | |||
|4,0 | |||
|81,0 | |||
|- | |||
|Overhang Supports, Ends | |||
|2 | |||
|2,0 | |||
|2,0 | |||
|28,5 | |||
|- | |||
|Overhang Supports, Sides | |||
|2 | |||
|2,0 | |||
|2,0 | |||
|78,0 | |||
|- | |||
|Under Tabletop Supports | |||
|10 | |||
|2,0 | |||
|2,0 | |||
|28,5 | |||
|- | |||
|Breadboard Ends | |||
|2 | |||
|2,0 | |||
|8,0 | |||
|38,5 | |||
|} | |||
== Research/Inspiration == | == Research/Inspiration == | ||
Revision as of 15:35, 5 November 2018
| ProjectInfoBox Dining Room Table | |
|---|---|
| |
| Status: | planning |
| Initiator: | User:Biddlesby |
| Team: | who else would like to help? |
| Materials Used: | reclaimed wood |
Plans
I'm following the instructions here:
http://www.ana-white.com/2009/12/plans-farmhouse-table-knock-off-of.html
Tools
- Tape measure
- Square
- Hammer
- Drill
- Circular saw
- Sanding machine
- Paint brush
Materials
- Finish Oil 8
- Screws
- Wood Glue
- Sandpaper (pieces and for sanding machine)
I also need to find the following wood pieces. These dimensions are in inches: I intend to convert them to cm:
| Description | Quantity | Height (inches) | Width (inches) | Length (inches) |
|---|---|---|---|---|
| Tabletop Pieces | 7 | 2,0 | 6,0 | 81,0 |
| Outside Legs, Inside Legs, End Aprons | 10 | 2,0 | 4,0 | 28,5 |
| Bottom End Supports for the Stretcher | 2 | 2,0 | 4,0 | 34,5 |
| Stretcher, Side Aprons | 3 | 2,0 | 4,0 | 81,0 |
| Overhang Supports, Ends | 2 | 2,0 | 2,0 | 28,5 |
| Overhang Supports, Sides | 2 | 2,0 | 2,0 | 78,0 |
| Under Tabletop Supports | 10 | 2,0 | 2,0 | 28,5 |
| Breadboard Ends | 2 | 2,0 | 8,0 | 38,5 |
