Vertical Bandsaw Introduction: Difference between revisions

Revision as of 12:56, 18 July 2018

This page is INCOMPLETE and still missing some important information before it can be used as a resource. Please use the "Discussion" feature above or talk to one of the tutors if you would like to help improve it. Thanks!

This is the content required for an introduction to our <Bandsaws> - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

Let's begin! First off, make sure you have read the machine's <MANUAL>.

Safety

Dangers

ENTANGLEMENT HAZARD!
NEVER use without instaled saveguard.
DO NOT use close by flameable liquides and/or gas.
DO NOT modify the machine on your own authority (insurance, you know).
Befor servicing, adjusting or cleaning the machine ALWAYS wait for the blade to grind to a halt.
ALWAYS keep bandsaw-blades in safe custody.
SPECIAL CAUTION when working with toxic woods (like; Eiche, Esche, Eibe, Buche, Buchsbaum).

Precautions

Alway wear:
Tight clothing,
Safty googles,
Ear protection,
when working with heavier workpieces, - safty-boots and
especialy while working with toxic woods, - dust mask.

Demonstration

The tutor will show you these steps in detail:

<...>

@@ Line 1: / Line 1: @@
 {{incomplete}}
-This is the content required for an introduction to our <Bandsaw> - '''reading this does NOT replace the mandatory session with a [[tutor]]!''' It will make it a lot quicker though ;-)
+This is the content required for an introduction to our <[[Bandsaws]]> - '''reading this does NOT replace the mandatory session with a [[tutor]]!''' It will make it a lot quicker though ;-)
 Let's begin! First off, make sure you have read the machine's <MANUAL>.