Material:Washers: Difference between revisions
m ("used with") |
(added location & suggested donation; filled in table) |
||
| Line 10: | Line 10: | ||
|image=washers.JPG | |image=washers.JPG | ||
|synonyms=flat washers;<br>DE: Unterlegscheiben, Beilagscheiben, DIN 125 | |synonyms=flat washers;<br>DE: Unterlegscheiben, Beilagscheiben, DIN 125 | ||
|available= | |available=yes (M3-4-5-6-8) | ||
|donation= | |donation=1 ct | ||
|location= | |location=[[Wood Workshop|wood workshop]] | ||
|tools= | |tools= | ||
|used with=[[screws]], [[nuts]] | |used with=[[screws]], [[nuts]] | ||
}} | }} | ||
Here's what you should | Here's what you should be able to find on site: | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|- | |- | ||
| Line 23: | Line 23: | ||
! scope="col"| thickness | ! scope="col"| thickness | ||
|- | |- | ||
! scope="row"| | ! scope="row"| 3.2 mm | ||
| | | 7 mm | ||
| | | 0.5 mm | ||
|- | |||
! scope="row"| 4.3 mm | |||
| 9 mm | |||
| 0.8 mm | |||
|- | |||
! scope="row"| 5.3 mm | |||
| 10 mm | |||
| 1 mm | |||
|- | |||
! scope="row"| 6.4 mm | |||
| 12 mm | |||
| 1.6 mm | |||
|- | |||
! scope="row"| 8.4 mm | |||
| 16 mm | |||
| 1.6 mm | |||
|} | |} | ||
<br clear=right> | <br clear=right> | ||
Revision as of 17:02, 5 January 2018
Washers can be used to increase the effective size of a screw head or nut in order to protect the material beneath or to keep the screw from slipping through a hole. They are also used as spacers, but if you need more than just a bit of a gap it might be a good idea to cut a matching length of pipe instead of using lots of stacked washers.
It's also possible to laser cut rings out of free laser scraps - maybe those could even be sunk with "3D engrave"? Please let us know if you've tried!
This page mainly shows you what sizes we have in stock. DIN 125 washers are "regular" washers; DIN 9021 washers are fender washers (DE: Karosseriescheiben) with OD (outer diameter) = 3 × ID (inner diameter).
Plain Washers
| MaterialInfoBox Plain Washers | |
|---|---|
| |
| Synonyms: | flat washers; DE: Unterlegscheiben, Beilagscheiben, DIN 125 |
| On Site? | yes (M3-4-5-6-8) |
| Suggested Donation: | 1 ct |
| Location: | wood workshop |
| Suggested Tools: | |
| Used with: | screws, nuts |
Here's what you should be able to find on site:
| ID | OD | thickness |
|---|---|---|
| 3.2 mm | 7 mm | 0.5 mm |
| 4.3 mm | 9 mm | 0.8 mm |
| 5.3 mm | 10 mm | 1 mm |
| 6.4 mm | 12 mm | 1.6 mm |
| 8.4 mm | 16 mm | 1.6 mm |
Fender Washers
| MaterialInfoBox Fender Washers | |
|---|---|
| |
| Synonyms: | penny washers; DE: Kotflügelscheiben, Karosseriescheiben, DIN 9021 |
| Suggested Tools: | |
| Used with: | screws, nuts |
Fender washers have a very large outer diameter and are commonly used when joining thin sheet materials together.
