Project:FlyerStand: Difference between revisions
From CoMakingSpace Wiki
m (not actually a cake stand ;-)) |
(→Gallery: moved STLs out of gallery as implied in #263 - works, but no captions) |
||
| Line 20: | Line 20: | ||
File:flyerStand01.JPG|the final result | File:flyerStand01.JPG|the final result | ||
File:FlyerStand_flyer.jpg|the new flyer we want to expose | File:FlyerStand_flyer.jpg|the new flyer we want to expose | ||
File:CoMakingSpace-flyerstand-wood.svg|the laser files for wood (12/80) and plexy (12/100) | File:CoMakingSpace-flyerstand-wood.svg|the laser files for wood (12/80) and plexy (12/100) | ||
</gallery> | </gallery> | ||
STL files (left = top part, right = lower part)<br> | |||
[[File:Oberteil_v1.stl|thumb|the top part STL]] | |||
[[File:Unterteil_v2.stl|thumb|the lower part STL]] | |||
Revision as of 21:35, 24 June 2022
| ProjectInfoBox Flyer Stand | |
|---|---|
| |
| Status: | completed, now ready to distribute |
| Release Date: | June 2022 |
| Initiator: | PloenK |
| Materials Used: | plywood (4 mm), plexiglass (4 mm), 3D filament |
| Tools Used: | Laser cutter, 3D printers |
| Approx. Cost: | 12 € |
The new flyers are out and I wanted to have a shiny stand to expose them in places like pubs, shops and other venues.
Approach
Take a sheet of 4mm plexi glas, a sheet of 4mm plywood (both 104,7mm x 147,7mm) lasered/printed with the files referenced in the gallery.
Gallery
- some footage of the making
the final result
the new flyer we want to expose
the laser files for wood (12/80) and plexy (12/100)
STL files (left = top part, right = lower part)
