Available Wood Screws

Here's a list of the wood screws that are available in our Wood Workshop. If you need one that is not listed yet, best buy them beforehand. If you notice one set of parts as being empty please mark it as such so it can be filled up/reordered.

Metric screws are listed separately.

TODO: split list into "will restock" and "to be used up without replacement"

Steady Selection

We'll try to keep these "standard" screws restocked as good as we can:

Diameter	Length	Head	Drive	Sketch	Material	notes	Suggested Donation
3 mm	12 mm				galvanized steel, yellow passivation	SPAX, self-tapping	2 ct
3 mm	16 mm				galvanized steel, yellow passivation	SPAX, self-tapping	2 ct
3 mm	20 mm				galvanized steel, yellow passivation	SPAX, self-tapping	2 ct
3 mm	30 mm				galvanized steel, yellow passivation	SPAX, self-tapping	2 ct
4 mm	20 mm				galvanized steel, yellow passivation	SPAX, self-tapping	2 ct
4 mm	30 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	3 ct
4 mm	40 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	4 ct
4 mm	50 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	5 ct
5 mm	40 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	5 ct
5 mm	50 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	6 ct
5 mm	60 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	8 ct
5 mm	80 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	10 ct
6 mm	40 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	6 ct
6 mm	60 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	8 ct
6 mm	80 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	12 ct
6 mm	100 mm				galvanized steel, yellow passivation	SPAX, self-tapping, partially threaded	15 ct

Wanted

6 × 80 mm screws would be a nice addition, they could also just replace the 6 × 100 mm ones in Lukas' opinion.

Self-tapping/"Spax" versions of all these sizes would be great if we find a good source!

Current Additions

Some other screws were donated by members and should still be there (please correct this list if they're not):

Diameter	Length	Head	Drive	Sketch	Material	notes	Suggested Donation
3 mm	20 mm				brass	partially threaded	3 ct
3.5 mm	17 mm				galvanized steel, yellow passivation	self-tapping	1 ct
3.5 mm	35 mm				galvanized steel, yellow passivation	partially threaded	1 ct
4 mm	40 mm				galvanized steel	partially threaded, self-tapping	2 ct
5 mm	45 mm				galvanized steel, yellow passivation	partially threaded, self-tapping; nearly empty	2 ct
5 mm	55 mm				brass, chrome-coated	partially threaded	8 ct
5 mm	55 mm				brass, chrome-coated	partially threaded	8 ct
5 mm	50 mm				iron	partially threaded	5 ct
2 mm	10 mm				brass	partially threaded	2 ct
3.2 mm	20 mm				brass	partially threaded	3 ct
5 mm	20 mm				brass	partially threaded	4 ct
4.5 mm	35 mm				brass	partially threaded	6 ct
4.5 mm	40 mm				iron	partially threaded	3 ct
4.5 mm	40 mm				brass	partially threaded	5 ct
4.5 mm	50 mm				brass	partially threaded	6 ct
3 mm	17 mm				iron	partially threaded	2 ct
5 mm	50 mm				brass	partially threaded	6 ct
4 mm	40 mm				brass, chrome-coated	partially threaded	4 ct
5 mm	40 mm				brass	partially threaded	4 ct
3 mm	10 mm				brass	partially threaded	2 ct
2 mm	12 mm				brass	partially threaded	2 ct

You may find additional sizes of recycled screws.