Project:Pegboard: Difference between revisions
From CoMakingSpace Wiki
(Add photos) |
|||
| Line 22: | Line 22: | ||
== Gallery == | == Gallery == | ||
[[File:Pegboard_pocket.png|200px|thumb|left|Pocket milling operation in Fusion 360]] | |||
[[File:Pegboard_drilling_holes.jpg|200px|thumb|left|Drilling holes in a sheet of MDF]] | [[File:Pegboard_drilling_holes.jpg|200px|thumb|left|Drilling holes in a sheet of MDF]] | ||
Latest revision as of 13:22, 25 March 2018
| ProjectInfoBox Pegboard | |
|---|---|
| |
| Status: | in progress |
| Release Date: | March 2018 |
| Initiator: | Mitja |
| Materials Used: | MDF, Filament |
| Tools Used: | CNC Router, 3D Printer |
| Software Used: | Fusion 360 |
| Approx. Cost: | < 10 EUR |
Typical US pegboards have 1/4 inch diameter holes, with a spacing of 1 inch. These holes can be easily drilled on our Workbee CNC.
Our locker doors allow mounting a sheet of 95cm x 35cm with a small cutout of 5cm x 5cm in the middle of the long edge.
Attachments
Peg attachments can be 3D printed, designs that work well will be collected here.
