Available Metric Screws: Difference between revisions

From CoMakingSpace Wiki

(Created page with "Here's a list of the metric screws that are available in our small parts cabinets. If you need one that is not listed yet, be...")
 
(3x10 nearly empty)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Here's a list of the [[Screws#Metric Screws|metric screws]] that are available in our [[Small Parts Cabinets|small parts cabinets]]. If you need one that is not listed yet, best buy a box and add a new entry to this list - we will then take care of making sure they are replaced when they are [[Template:Refill|reported as empty]].
Here's a list of the [[Screws#Metric Screws|metric screws]] that are available in our [[Small Parts Cabinets|small parts cabinets]]. If you need one that is not listed yet, best buy them beforehand. If you notice one set of parts as being empty please [[Template:Refill|mark]] it as such so it can be filled up/reordered.


Wood screws are [[Available Wood Screws|listed separately]].
Wood screws are [[Available Wood Screws|listed separately]].
Line 11: Line 11:
! scope="col"| Material
! scope="col"| Material
! scope="col"| Notes
! scope="col"| Notes
! scope="col"| Suggested [[Donation Boxes|Donation]]
|-
|-
! scope="row"| ''<e.g. 4 mm>''
! scope="row"| 3 mm
| ''<e.g. 12 mm>''
| 6 mm
| ''<e.g. [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]>''
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| ''<e.g. [[File:Screw Head - Hex Socket.svg|30 px|center|2 mm]]>''
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| ''<e.g. [[Material:Stainless Steel|stainless steel]]>''
| galvanized [[steel]]
| ''<e.g. DIN 912>''
| DIN 7991
| 1 ct
|-
! scope="row"| 3 mm
| 10 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912; {{refill}}
| 2 ct
|-
! scope="row"| 3 mm
| 12 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 1 ct
|-
! scope="row"| 3 mm
| 16 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912
| 2 ct
|-
! scope="row"| 3 mm
| 25 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 3 ct
|-
! scope="row"| 3 mm
| 30 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 2 ct
|-
! scope="row"| 3 mm
| 40 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 3 ct
|-
! scope="row"| 4 mm
| 8 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 2 ct
|-
! scope="row"| 4 mm
| 10 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912
| 2 ct
|-
! scope="row"| 4 mm
| 16 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912
| 2 ct
|-
! scope="row"| 4 mm
| 16 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 2 ct
|-
! scope="row"| 4 mm
| 25 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 3 ct
|-
! scope="row"| 4 mm
| 35 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 3 ct
|-
! scope="row"| 4 mm
| 40 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 4 ct
|-
! scope="row"| 5 mm
| 10 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 2 ct
|-
! scope="row"| 5 mm
| 12 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912
| 2 ct
|-
! scope="row"| 5 mm
| 20 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 3 ct
|-
! scope="row"| 5 mm
| 25 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 3 ct
|-
! scope="row"| 5 mm
| 40 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 3 ct
|-
! scope="row"| 5 mm
| 50 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 5 ct
|-
! scope="row"| 6 mm
| 12 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912
| 3 ct
|-
! scope="row"| 6 mm
| 12 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 2 ct
|-
! scope="row"| 6 mm
| 25 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 912; {{refill}}
| 4 ct
|-
! scope="row"| 6 mm
| 25 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 4 ct
|-
! scope="row"| 6 mm
| 45 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 4 ct
|-
! scope="row"| 6 mm
| 50 mm
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| partially threaded, DIN 912
| 6 ct
|-
! scope="row"| 8 mm
| 16 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 4 ct
|-
! scope="row"| 8 mm
| 20 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 5 ct
|-
! scope="row"| 8 mm
| 30 mm
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]]
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]]
| galvanized [[steel]]
| DIN 7991
| 6 ct
|-
! scope="row"| 8 mm
| 40 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 7 ct
|-
! scope="row"| 8 mm
| 60 mm
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]]
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]]
| galvanized [[steel]]
| DIN 933
| 10 ct
|}
|}


Latest revision as of 22:04, 11 September 2019

Here's a list of the metric screws that are available in our small parts cabinets. If you need one that is not listed yet, best buy them beforehand. If you notice one set of parts as being empty please mark it as such so it can be filled up/reordered.

Wood screws are listed separately.

Diameter Length Head Drive Material Notes Suggested Donation
3 mm 6 mm
countersunk
internal hex
 galvanized steel DIN 7991 1 ct
3 mm 10 mm
cylindrical
internal hex
 galvanized steel DIN 912; nearly empty 2 ct
3 mm 12 mm
countersunk
internal hex
 galvanized steel DIN 7991 1 ct
3 mm 16 mm
cylindrical
internal hex
 galvanized steel DIN 912 2 ct
3 mm 25 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 3 ct
3 mm 30 mm
hex head cap
external hex
 galvanized steel DIN 933 2 ct
3 mm 40 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 3 ct
4 mm 8 mm
countersunk
internal hex
 galvanized steel DIN 7991 2 ct
4 mm 10 mm
cylindrical
internal hex
 galvanized steel DIN 912 2 ct
4 mm 16 mm
cylindrical
internal hex
 galvanized steel DIN 912 2 ct
4 mm 16 mm
countersunk
internal hex
 galvanized steel DIN 7991 2 ct
4 mm 25 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 3 ct
4 mm 35 mm
hex head cap
external hex
 galvanized steel DIN 933 3 ct
4 mm 40 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 4 ct
5 mm 10 mm
countersunk
internal hex
 galvanized steel DIN 7991 2 ct
5 mm 12 mm
cylindrical
internal hex
 galvanized steel DIN 912 2 ct
5 mm 20 mm
countersunk
internal hex
 galvanized steel DIN 7991 3 ct
5 mm 25 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 3 ct
5 mm 40 mm
hex head cap
external hex
 galvanized steel DIN 933 3 ct
5 mm 50 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 5 ct
6 mm 12 mm
cylindrical
internal hex
 galvanized steel DIN 912 3 ct
6 mm 12 mm
countersunk
internal hex
 galvanized steel DIN 7991 2 ct
6 mm 25 mm
cylindrical
internal hex
 galvanized steel DIN 912; nearly empty 4 ct
6 mm 25 mm
countersunk
internal hex
 galvanized steel DIN 7991 4 ct
6 mm 45 mm
hex head cap
external hex
 galvanized steel DIN 933 4 ct
6 mm 50 mm
cylindrical
internal hex
 galvanized steel partially threaded, DIN 912 6 ct
8 mm 16 mm
countersunk
internal hex
 galvanized steel DIN 7991 4 ct
8 mm 20 mm
hex head cap
external hex
 galvanized steel DIN 933 5 ct
8 mm 30 mm
countersunk
internal hex
 galvanized steel DIN 7991 6 ct
8 mm 40 mm
hex head cap
external hex
 galvanized steel DIN 933 7 ct
8 mm 60 mm
hex head cap
external hex
 galvanized steel DIN 933 10 ct

You may find additional sizes of recycled screws.

Retrieved from "https://wiki.comakingspace.de/index.php?title=Available_Metric_Screws&oldid=7600"