Project:Roof Sign: Difference between revisions
From CoMakingSpace Wiki
(stub) |
(abandoned) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
We integrated our [[Sound System|sound system]]'s radio antenna in a little | {{ProjectInfoBox | ||
|project title=Roof-Mounted Radio Antenna & Sign | |||
|image=M radio antenna.JPG | |||
|status=abandoned (April 2019) | |||
|date=March 2018 | |||
|initiator={{£}} | |||
|team=[[User:Johannes|Johannes]], [[User:Fiohoerenz|Fio]] | |||
|materials=[[Scrap Wood|scrap wood]], [[nails]], [[screws]], rocks | |||
|tools=[[Chop Saw|chop saw]], [[Cordless Drill|cordless drill]], [[hammer]] | |||
|software= | |||
|cost=cents (mostly recycled materials) | |||
}} | |||
We integrated our [[Sound System|sound system]]'s radio antenna in a little wooden "sculpture" that we put on our roof. | |||
Done: | Done: | ||
* make | * make a letter "M" out of [[Scrap Wood|scrap wood]] | ||
* attach radio antenna to the "M" | * attach radio antenna to the "M" | ||
* route antenna wire to the sound system | * route antenna wire to the sound system | ||
* attach weights to letter legs | |||
Next: | <strike>Next: | ||
* install RGB [[LED]] strips | * install RGB [[LED]] strips | ||
* let the LEDs indicate whether the space is open | * let the LEDs indicate whether the space is open</strike> | ||
After about a year without problems, we took the remains of the sign down in April 2019 after rain and wind had destroyed most of it (the antenna was even ripped apart in a few spots). Lesson learned: you can never have enough weights, and make sure you connect them to the rest really well... | |||
== Early Version == | |||
We originally made more letters and planned to put the entire word "MAKE" up there but it would have been very hard to make windproof and signs of more than 1 m in size may require a building permit. Therefore, we settled for the "M"-shaped antenna as the only element. | |||
[[Category:Electronics]] | [[Category:Electronics]] | ||
[[Category:Woodworking]] | [[Category:Woodworking]] | ||
Latest revision as of 21:44, 1 May 2019
| ProjectInfoBox Roof-Mounted Radio Antenna & Sign | |
|---|---|
| |
| Status: | abandoned (April 2019) |
| Release Date: | March 2018 |
| Initiator: | Lukas |
| Team: | Johannes, Fio |
| Materials Used: | scrap wood, nails, screws, rocks |
| Tools Used: | chop saw, cordless drill, hammer |
| Approx. Cost: | cents (mostly recycled materials) |
We integrated our sound system's radio antenna in a little wooden "sculpture" that we put on our roof.
Done:
- make a letter "M" out of scrap wood
- attach radio antenna to the "M"
- route antenna wire to the sound system
- attach weights to letter legs
Next:
- install RGB LED strips
let the LEDs indicate whether the space is open
After about a year without problems, we took the remains of the sign down in April 2019 after rain and wind had destroyed most of it (the antenna was even ripped apart in a few spots). Lesson learned: you can never have enough weights, and make sure you connect them to the rest really well...
Early Version
We originally made more letters and planned to put the entire word "MAKE" up there but it would have been very hard to make windproof and signs of more than 1 m in size may require a building permit. Therefore, we settled for the "M"-shaped antenna as the only element.
