File:Roubo workbench 1-12.JPG: Difference between revisions
From CoMakingSpace Wiki
(rough work for a tenon done by drilling with Forstner bits - now the chiseling may begin!) |
(→Summary: mentioned Ryoba & relief cuts) |
||
| Line 1: | Line 1: | ||
== Summary == | == Summary == | ||
Rough work for a [[mortise]] done by drilling with a [[Forstner Bits|Forstner bit]] - now the [[chiseling]] may begin! | |||
Also visible: some relief cuts from the exposed edge of the second mortise, sawn with a [[Ryoba]]. | |||
== Licensing == | == Licensing == | ||
{{CC-by-sa-4.0}} | {{CC-by-sa-4.0}} | ||
Latest revision as of 19:07, 2 January 2018
Summary
Rough work for a mortise done by drilling with a Forstner bit - now the chiseling may begin!
Also visible: some relief cuts from the exposed edge of the second mortise, sawn with a Ryoba.
Licensing
This file is licensed under CC-BY-SA 4.0. You are allowed to use and alter this file freely as long as you share it under the same license and attribute the original author(s).
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 18:58, 2 January 2018 |  | 1,920 × 1,080 (357 KB) | Lukas (talk | contribs) | rough work for a tenon done by drilling with Forstner bits - now the chiseling may begin! |
You cannot overwrite this file.
File usage
The following page uses this file:
