Project:Laser Engraved Stamps: Difference between revisions

From CoMakingSpace Wiki

mNo edit summary
m (release date)
 
Line 1: Line 1:
{{ProjectInfoBox|project title=Laser Engraved Stamps|image=Laser engraved stamps.jpg|status=done|initiator=[[Luzian]]|team=[[Martin]], [[Patrick]]|materials=}}
{{ProjectInfoBox|project title=Laser Engraved Stamps|image=Laser engraved stamps.jpg|status=done|date=October 2021|initiator=[[Luzian]]|team=[[Martin]], [[Patrick]]|materials=}}





Latest revision as of 06:08, 6 October 2021

ProjectInfoBox

Laser Engraved Stamps

Laser engraved stamps.jpg
Status: done
Release Date: October 2021
Initiator: Luzian
Team: Martin, Patrick



As a preparation for the Türöffnertag 2021, Luzian had the idea to let the kids create custom stamps with our laser cutter.

Material

The stamps are made of special laser rubber. The holders can either be 3D printed with a custom design created by Patrick or be made out of wood.

Designing the Stamp

In order to enable the kids to design their own stamps, we have created a template where they can draw the design on:

LaserStampTemplate.png

This template can be printed and - after designing the stamp - scanned.

Preparing the Image

After scanning the template with the stamp design, it needs to be prepared for the laser cutter. For this, 3 steps are needed:

  1. convert it into a 2-bit image (the laser can only produce black or white. no grey-scales are possible.
  2. invert the colors
  3. horizontally mirror the image

Laser the Stamp and Test It

The last step follows the regular preparations for engraving pictures with the laser cutter. The needed settings can be found on the page "Laser Cutter Material Settings".

Further Reading