Network: Difference between revisions

From CoMakingSpace Wiki

m (Introduction)
m (Linking the Manageent for changes.)
Line 44: Line 44:




* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact [[User:Pakue|Patrick]]
* If you need to change settings for the Netgear Router (providing the Freifunk network), please contact [[Management|the Management]]


* For changing settings on the Raspberry pi, please contact [[User:Pakue|Patrick]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]
* For changing settings on the Raspberry pi, please contact [[Management|the Management]], [[User:NitramLegov|Martin]] or [[User:Olaf|Olaf]]

Revision as of 14:28, 9 June 2018

The network at the Comakingspace is built up as follows:

Internet ---> 1&1 Router --->Netgear WNDR3700v4 (Freifunk) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

Internet Connection

In order to connect to the Internet, you can use SSID freifunk-rhein-neckar.de

Internal Network

In order to connect to the Internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The Key can be found at the space. DHCP is configures as follows:

IP Host
192.168.1.1 TP-Link WDR4900
192.168.1.2 Raspberry Pi (next to the Music)
192.168.1.3 Lasertjet Printer
192.168.1.4 - 192.168.1.99 Open for further static services
192.168.1.100 - 192.168.1.254 IPs assigned by DHCP
192.168.1.255 Broadcast address

Within the internal network, the following services are provided:

Service Host-IP Hostname Port
Mopidy (MPD Daemon) 192.168.1.2 comakingcontroller 6600
Mopidy (Webinterface) 192.168.1.2 comakingcontroller 8888
SSH 192.168.1.2 comakingcontroller 22
Printing 192.168.1.3 ??? ???


Configuration Changes

  • If you need to change settings for the Netgear Router (providing the Freifunk network), please contact the Management