Network: Difference between revisions

From CoMakingSpace Wiki

(Adding fix IPs)
m (Formatting)
Line 13: Line 13:
{| class = "wikitable"
{| class = "wikitable"
|-
|-
! IP !! Host
| 192.168.1.1 || TP-Link WDR4900
| 192.168.1.1 || TP-Link WDR4900
| -
| -
Line 29: Line 30:
{| class="wikitable"
{| class="wikitable"
|-
|-
! Service                                         !! Host                       !! Port
! Service !! Host-IP !! Hostname !! Port
|-
|-
| Mopidy (MPD Daemon)     || 192.168.1.2         || 6600
| Mopidy (MPD Daemon) || 192.168.1.2 || comakingcontroller || 6600
|-
|-
| Mopidy (Webinterface)             || 192.168.1.2 || 8888
| Mopidy (Webinterface) || 192.168.1.2 || comakingcontroller || 8888
|-
|-
| SSH || 192.168.1.2 || 22
| SSH || 192.168.1.2 || comakingcontroller || 22
|-
|-
| Printing     || Laserjet || ???
| Printing || 192.168.1.3 || ??? || ???
|}
|}



Revision as of 22:35, 8 June 2018

This wiki page will serve as a documentation point for the Internal Network.

Currently, the Network is built up as follows:

Internet ---> 1&1 Router --->Netgear WNDR3700v4 (Freifunk) ---> TP-Link WDR4900 V1.3 (OpenWRT, NATting Freifunk to internal network)

Internet Connection

In order to connect to the Internet, you can use SSID freifunk-rhein-neckar.de

Internal Network

In order to connect to the Internal network of the CoMakingSpace, please use SSID "CoMakingSpace". The Key can be found at the space. DHCP is configures as follows:

IP Host 192.168.1.1 TP-Link WDR4900 - 192.168.1.2 Raspberry Pi (next to the Music) - 192.168.1.3 Lasertjet Printer - 192.168.1.4 - 192.168.1.99 Open for further static services - 192.168.1.100 - 192.168.1.254 IPs assigned by DHCP - 192.168.1.255 Broadcast address

Within the internal network, the following services are provided:

Service Host-IP Hostname Port
Mopidy (MPD Daemon) 192.168.1.2 comakingcontroller 6600
Mopidy (Webinterface) 192.168.1.2 comakingcontroller 8888
SSH 192.168.1.2 comakingcontroller 22
Printing 192.168.1.3 ??? ???


Configuration

  • If you need to change settings for the Netgear Router, please contact ......
  • For changing settings on the Raspberry pi, please contact .......