Handheld Circular Saw Introduction

This is the content required for an introduction to our circular saw - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)

Let's begin! First off, make sure you have read the machine's manual.

Safety

Dangers

• sawdust and small splinters can fly towards the operator and others
• sharp and rotating exposed blade - will keep spinning for a bit after turning the power off!

Precautions

• hook up a shop vac, but be aware the dust extraction from our "Herkules" saw is very incomplete
• wear goggles and ear defenders!
• dust mask: depending on the material you're cutting
• get a helper who can hold your cutoff (depending on the size it) so it doesn't fall down
• make sure the cutting path is free of obstacles (except your workpiece of course)
• let the saw start before touching the workpiece
• keep the saw secure after your cut until is has come to a complete stop

Demonstration

The tutor will show you these steps in detail:

• using the circular saw guide