Available Metric Screws: Difference between revisions
From CoMakingSpace Wiki
Created page with "Here's a list of the metric screws that are available in our small parts cabinets. If you need one that is not listed yet, be..." |
NitramLegov (talk | contribs) m Cleanup |
||
(5 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
Here's a list of the [[Screws#Metric Screws|metric screws]] that are available in our [[Small Parts Cabinets|small parts cabinets]]. If you need one that is not listed yet, best buy | Here's a list of the [[Screws#Metric Screws|metric screws]] that are available in our [[Small Parts Cabinets|small parts cabinets]]. If you need one that is not listed yet, best buy them beforehand. If you notice one set of parts as being empty please [[Template:Refill|mark]] it as such so it can be filled up/reordered. | ||
Wood screws are [[Available Wood Screws|listed separately]]. | Wood screws are [[Available Wood Screws|listed separately]]. | ||
Line 12: | Line 12: | ||
! scope="col"| Notes | ! scope="col"| Notes | ||
|- | |- | ||
! scope="row"| | ! scope="row"| 3 mm | ||
| | | 6 mm | ||
| | | [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | ||
| | | [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | ||
| | | galvanized [[steel]] | ||
| | | DIN 7991 | ||
|- | |||
! scope="row"| 3 mm | |||
| 10 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912; {{refill}} | |||
|- | |||
! scope="row"| 3 mm | |||
| 12 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 3 mm | |||
| 16 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912 | |||
|- | |||
! scope="row"| 3 mm | |||
| 25 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 3 mm | |||
| 30 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|- | |||
! scope="row"| 3 mm | |||
| 40 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 4 mm | |||
| 8 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 4 mm | |||
| 10 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912 | |||
|- | |||
! scope="row"| 4 mm | |||
| 16 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912 | |||
|- | |||
! scope="row"| 4 mm | |||
| 16 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 4 mm | |||
| 25 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 4 mm | |||
| 35 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|- | |||
! scope="row"| 4 mm | |||
| 40 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 5 mm | |||
| 10 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 5 mm | |||
| 12 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912 | |||
|- | |||
! scope="row"| 5 mm | |||
| 20 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 5 mm | |||
| 25 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 5 mm | |||
| 40 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|- | |||
! scope="row"| 5 mm | |||
| 50 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 6 mm | |||
| 12 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912 | |||
|- | |||
! scope="row"| 6 mm | |||
| 12 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 6 mm | |||
| 25 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 912; {{refill}} | |||
|- | |||
! scope="row"| 6 mm | |||
| 25 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 6 mm | |||
| 45 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|- | |||
! scope="row"| 6 mm | |||
| 50 mm | |||
| [[File:screw head cylindrical.PNG|30x30 px|center|cylindrical]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| partially threaded, DIN 912 | |||
|- | |||
! scope="row"| 8 mm | |||
| 16 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 8 mm | |||
| 20 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|- | |||
! scope="row"| 8 mm | |||
| 30 mm | |||
| [[File:screw head sunk.PNG|30x30 px|center|countersunk]] | |||
| [[File:Screw Head - Hex Socket.svg|30 px|center|internal hex]] | |||
| galvanized [[steel]] | |||
| DIN 7991 | |||
|- | |||
! scope="row"| 8 mm | |||
| 40 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|- | |||
! scope="row"| 8 mm | |||
| 60 mm | |||
| [[File:Screw head hex cap.PNG|30x30 px|center|hex head cap]] | |||
| [[File:Screw Head - Hex External.svg|30 px|center|external hex]] | |||
| galvanized [[steel]] | |||
| DIN 933 | |||
|} | |} | ||
Latest revision as of 00:48, 2 December 2024
Here's a list of the metric screws that are available in our small parts cabinets. If you need one that is not listed yet, best buy them beforehand. If you notice one set of parts as being empty please mark it as such so it can be filled up/reordered.
Wood screws are listed separately.
Diameter | Length | Head | Drive | Material | Notes |
---|---|---|---|---|---|
3 mm | 6 mm | galvanized steel | DIN 7991 | ||
3 mm | 10 mm | galvanized steel | DIN 912; nearly empty | ||
3 mm | 12 mm | galvanized steel | DIN 7991 | ||
3 mm | 16 mm | galvanized steel | DIN 912 | ||
3 mm | 25 mm | galvanized steel | partially threaded, DIN 912 | ||
3 mm | 30 mm | galvanized steel | DIN 933 | ||
3 mm | 40 mm | galvanized steel | partially threaded, DIN 912 | ||
4 mm | 8 mm | galvanized steel | DIN 7991 | ||
4 mm | 10 mm | galvanized steel | DIN 912 | ||
4 mm | 16 mm | galvanized steel | DIN 912 | ||
4 mm | 16 mm | galvanized steel | DIN 7991 | ||
4 mm | 25 mm | galvanized steel | partially threaded, DIN 912 | ||
4 mm | 35 mm | galvanized steel | DIN 933 | ||
4 mm | 40 mm | galvanized steel | partially threaded, DIN 912 | ||
5 mm | 10 mm | galvanized steel | DIN 7991 | ||
5 mm | 12 mm | galvanized steel | DIN 912 | ||
5 mm | 20 mm | galvanized steel | DIN 7991 | ||
5 mm | 25 mm | galvanized steel | partially threaded, DIN 912 | ||
5 mm | 40 mm | galvanized steel | DIN 933 | ||
5 mm | 50 mm | galvanized steel | partially threaded, DIN 912 | ||
6 mm | 12 mm | galvanized steel | DIN 912 | ||
6 mm | 12 mm | galvanized steel | DIN 7991 | ||
6 mm | 25 mm | galvanized steel | DIN 912; nearly empty | ||
6 mm | 25 mm | galvanized steel | DIN 7991 | ||
6 mm | 45 mm | galvanized steel | DIN 933 | ||
6 mm | 50 mm | galvanized steel | partially threaded, DIN 912 | ||
8 mm | 16 mm | galvanized steel | DIN 7991 | ||
8 mm | 20 mm | galvanized steel | DIN 933 | ||
8 mm | 30 mm | galvanized steel | DIN 7991 | ||
8 mm | 40 mm | galvanized steel | DIN 933 | ||
8 mm | 60 mm | galvanized steel | DIN 933 |
You may find additional sizes of recycled screws.