Category:Jigs: Difference between revisions

Latest revision as of 22:49, 11 May 2024

Jigs (Vorrichtungen, Werkstatthilfen) are helpers for difficult standard operations, such as drilling angled holes, making specific cuts, or accurately repeating something.

jig to hold a specific odd-shaped workpiece on top of a table saw sled

They can usually be self-made! Please share your jigs if they can benefit others - it's as easy as labeling them with a meaningful name and creating a corresponding wiki page with instructions! Every page in the "Jigs" category shows up on the bottom of this page for everyone to find.

Good to know for adjustable jigs: M6 screws advance exactly 1 mm per turn.

Ideas

Here are some ideas for commonly needed jigs if you feel inclined to make one for yourself or the Space:

bench hook
- lvl 2: shooting board
table saw sleds
drill press table
star knob jig - perhaps one for M6 and one for M8 screws/T-nuts?
- or a fancier one for a variety of shapes
V-block for drilling into round or angled pieces
- should have a long "V" groove and a second "V" on the side, as shown here

Subcategories

This category has the following 5 subcategories, out of 5 total.

Pages in category "Jigs"

The following 7 pages are in this category, out of 7 total.

B

Bench Hook

C

F

Project:Flaschenschneider

M

Miter Boxes

T

Material:T Tracks

@@ Line 1: / Line 1: @@
 Jigs ''(Vorrichtungen, Werkstatthilfen)'' are helpers for difficult standard operations, such as drilling angled holes, making specific cuts, or accurately repeating something.
-[[File:Horizontal drill jig.jpeg|thumb|right|simple fixture for horizontal drilling - usable, but most proper jigs take a bit more effort]]
+[[File:Jig on a jig.jpg|thumb|right|jig to hold a specific odd-shaped workpiece on top of a [[Table Saw Sled|table saw sled]]]]
-'''They can usually be self-made!'''
+'''They can usually be self-made!''' Please share your jigs if they can benefit others - it's as easy as labeling them with a meaningful name and creating a corresponding wiki page with instructions! Every page in the "Jigs" category shows up on the bottom of this page for everyone to find.
 Good to know for adjustable jigs: M6 screws advance exactly 1 mm per turn.
 == Ideas ==
-Here are some ideas for commonly needed jigs if you feel inclined to make one:
+Here are some ideas for commonly needed jigs if you feel inclined to make one for yourself or the Space:
-* bench hook
+* [[Bench Hook|bench hook]]
-* shooting board
+** lvl 2: shooting board
-* table saw sleds
+* [[Table Saw Sled|table saw sleds]]
 * drill press table
 * [https://www.youtube.com/watch?v=C9D683to0uY star knob jig] - perhaps one for M6 and one for M8 screws/T-nuts?
+** or a [https://m.youtube.com/watch?v=vHfc7911IEo fancier one] for a variety of shapes
 * V-block for drilling into round or angled pieces
 ** should have a long "V" groove and a second "V" on the side, as shown [http://www.holzwerken.net/Wissen/Tipps-Tricks/Drechseln/Einfach-bohren-an-runden-Sprossen here]