Material:Threaded Rods
From CoMakingSpace Wiki
(Redirected from Threaded Rod)
| MaterialInfoBox Threaded Rods | |
|---|---|
| |
| Synonyms: | allthread, threaded bars, "headless bolts"; DE: Gewindestangen |
| On Site? | some (M3-4-5-6-8) |
| Location: | metal workshop |
| Suggested Tools: | hacksaws, rotary tool, files, dies |
| Contains: | usually galvanized steel |
| Similar (More or Less): | metric screws |
Threaded rods are cheap metal parts that are basically metric screws without heads.
To turn them without damaging the thread, try countering two nuts against each other and grip them with wrenches or pliers or cut a groove into the end to insert a flathead screwdriver.
Cut them to your desired length with a hacksaw or rotary tool - to protect the thread at the cutting point, screw on a nut and remove it after cutting/filing or use a die.
