Hex Keys
From CoMakingSpace Wiki
(Redirected from T-Handle Hex Keys)
| ToolInfoBox Hex Keys | |
|---|---|
| |
| Synonyms: | Allen keys, Allen wrenches; DE: Inbusschlüssel, Imbusschlüssel, Innensechskantschlüssel, Stiftschlüssel, Winkelschlüssel, Winkelschraubendreher |
| Type: | hand tool |
| Material: | screws |
| Location: | metal workshop & wood workshop (above drilling table) |
| Access Requirements: | upon reading |
| Similar (More or Less): | hex screwdriver bits, hex screwdrivers, Torx keys |
Hex keys are used to fasten internal hex drive screws.
Besides metric hex drives in (half) millimeter steps, non-metric screws are relatively common so make sure the key you are using actually fits! Round keys don't work too well anymore...
There is a large set of metric and inch keys in the metal workshop and some common metric sizes in the grey screwdriver bit set.
T-Handle Hex Keys
| ToolInfoBox T-Handle Hex Keys | |
|---|---|
| |
| Synonyms: | DE: T-Griff-Schlüssel-Satz |
| Material: | bicycles |
| Location: | Bike Lounge |
This set is used for assembling and repairing bicycles in our Bike Lounge.
Available Sizes:
- 2 × 90 mm
- 2.5 × 100 mm
- 3 × 115 mm
- 4 × 120 mm
- 5 × 140 mm
- 6 × 160 mm
- 8 × 175 mm
- 10 × 200 mm
