Project:Ultimate Frisbee Clips: Difference between revisions
From CoMakingSpace Wiki
No edit summary |
(categorization, minor formatting) |
||
| Line 1: | Line 1: | ||
Someone on a team I used to play for had one of these clips to keep a disc on the outside of their bag when we were on a trip and I finally have the opportunity to print my own. | Someone on a team I used to play for had one of these clips to keep a disc on the outside of their bag when we were on a trip and I finally have the opportunity to [[3DP|3D print]] my own. | ||
It is useful because it is very easy to 'warp' o bend a disc when you are (over)packing a bag to travel with. | It is useful because it is very easy to 'warp' o bend a disc when you are (over)packing a bag to travel with. | ||
I was lazy and | I was lazy and didn't design my own clips. Instead I have used 2 different designs I found on thingiverse. | ||
* [https://www.thingiverse.com/thing:5030934 Design 1] | |||
* [https://www.thingiverse.com/thing:3889169 Design 2] | |||
I ended up liking Design 1 more than Design 2. | I ended up liking Design 1 more than Design 2. | ||
The only issuse I had was | The only issuse I had was that the hole for the keyring didn't fit the keyring I had. I printed it again scaled up to 110% and with the 0.4mm nozzle instead of the 0.8mm. | ||
The result was much better for what I wanted. | The result was much better for what I wanted. | ||
| Line 18: | Line 17: | ||
File:Small clip view.jpg|Holding a disc | File:Small clip view.jpg|Holding a disc | ||
File:Scaled clip better clearance.jpg|More clearance | File:Scaled clip better clearance.jpg|More clearance | ||
File:Scaled clip works.jpg | File:Scaled clip works.jpg|works! | ||
</gallery> | </gallery> | ||
[[Category:3D Printing]] | |||
[[Category:Quick Projects]] | |||
[[Category:Sport]] | |||
Latest revision as of 00:23, 26 January 2024
Someone on a team I used to play for had one of these clips to keep a disc on the outside of their bag when we were on a trip and I finally have the opportunity to 3D print my own.
It is useful because it is very easy to 'warp' o bend a disc when you are (over)packing a bag to travel with.
I was lazy and didn't design my own clips. Instead I have used 2 different designs I found on thingiverse.
I ended up liking Design 1 more than Design 2. The only issuse I had was that the hole for the keyring didn't fit the keyring I had. I printed it again scaled up to 110% and with the 0.4mm nozzle instead of the 0.8mm. The result was much better for what I wanted.
No clearance
Holding a disc
More clearance
works!
