Project:Stock Chair: Difference between revisions

From CoMakingSpace Wiki

No edit summary
mNo edit summary
Line 5: Line 5:
|date=2023
|date=2023
|initiator={{M}}
|initiator={{M}}
|materials=Wood, Seat Webbing
|materials=[[Wood]], [[Wood Glue]], Seat Webbing
|tools=[[Jointer-Planer]], [[Table Saw]],<br> [[Chop Saw]], [[Plunge Saw]], [[Handheld Router]],<br>[[Eccentric Sander]], Shaper Origin, Staple Gun
|tools=[[Jointer-Planer]], [[Table Saw]],<br> [[Chop Saw]], [[Plunge Saw]], [[Handheld Router]],<br>[[Eccentric Sander]], Shaper Origin, Staple Gun
|software=
|software=

Revision as of 19:26, 13 August 2023

ProjectInfoBox

Stock Chair

Stock-chair05.jpeg
Status: prototype completed
Release Date: 2023
Initiator: Mitja
Materials Used: Wood, Wood Glue, Seat Webbing
Tools Used: Jointer-Planer, Table Saw,
Chop Saw, Plunge Saw, Handheld Router,
Eccentric Sander, Shaper Origin, Staple Gun


This Stock Chair is built based on the premium project instructions on ShaperHub. It is using one single piece of stock hardwood which is then cut into the different parts of the chair.

Raw material: "Baudiele" (no hardwood as recommended)
Stock after planing and first cuts
Cut to size and with tenons for joinery.
Jig to make the angled cut for the backrest. You can also see one mortise on the leg.