Project:Snowflake: Difference between revisions
From CoMakingSpace Wiki
(Pictures!) |
(gallery order (correct me if I'm wrong!)) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 8: | Line 8: | ||
|cost= See table (WIP) | |cost= See table (WIP) | ||
}} | }} | ||
I found a video on youtube ([https://youtu.be/Hc5JZPW1etg?si=JLnMpY8nPuvu41_s THIS ONE]) and decided to follow it. | |||
<gallery heights="200" mode="packed-overlay" caption= | Dont buy a cheap (not so cheap) glued up panel from the hardware store like I did. | ||
Something is burning on almost every cut... | |||
Will update this page further when I am not on a hotspot :) | |||
<gallery heights="200" mode="packed-overlay" caption=gallery> | |||
File:Blank Stock.jpg | |||
File:Push block cuts.jpg | |||
File:Glue up.jpg | |||
File:SNowflake.jpg | File:SNowflake.jpg | ||
</gallery> | </gallery> | ||
Latest revision as of 14:56, 22 April 2024
| ProjectInfoBox SNOWFLAKE | |
|---|---|
| |
| Status: | Ongoing |
| Initiator: | Adam (User:Finno) |
| Materials Used: | Time, Wood, Glue, Tape |
| Tools Used: | Table Saw, Chop Saw |
| Approx. Cost: | See table (WIP) |
I found a video on youtube (THIS ONE) and decided to follow it.
Dont buy a cheap (not so cheap) glued up panel from the hardware store like I did.
Something is burning on almost every cut... Will update this page further when I am not on a hotspot :)
- gallery
