Material:Wood Filament

Wood filament by UniCoFil is an Arboblend type filament with 25% wood particle content.

MK3 settings

Here are the settings to successfully print on a Prusa MK3:

• 0.6mm steel nozzle
• 195 nozzle temperature
• 50 bed temperature
• properly calibrated distance from nozzle to bed is super important here, does not stick to PEI as well as PLA
• first layer at 33% speed
• other layers at 50% speed
• gradually increase fan speed after first layer, jumping from off to max will cause a temperature jump below the point where filament still flows and result in your print breaking at this point later