Material:Wood Filament: Difference between revisions
From CoMakingSpace Wiki
(Created page with "[http://www.unicofil.de/en/holz-natur-fichte.html Wood filament] by Unicofil is an Material:Arboblend type filament with 25% wood particle content. === MK3 settings =...") |
(No difference)
|
Revision as of 08:24, 14 June 2018
Wood filament by Unicofil is an Material:Arboblend type filament with 25% wood particle content.
MK3 settings
Here are the settings to successfully print on a Prusa MK3:
- 195 nozzle temperature
- 50 bed temperature
- properly calibrated distance from nozzle to bed is super important here, does not stick to PEI as well as PLA
- first layer at 33% speed
- other layers at 50% speed
- gradually increase fan speed after first layer, jumping from off to max will cause a temperature jump below the point where filament still flows and result in your print breaking at this point later