Handheld Drill Introduction
From CoMakingSpace Wiki
This is the content required for an introduction to our handheld power drills - reading this does NOT replace the mandatory session with a tutor! It will make it a lot quicker though ;-)
Let's begin! First off, make sure you have read the machine's manual, if available (check its "InfoBox" in the wiki for instructions how to find it).
Safety
Dangers
- exposed & rapidly spinning chucks
- possible kickback due to a drill bit that binds with the material
Precautions
- do not wear gloves, they could get caught!
- stay clear of the chuck when in operation - use a secondary handle if possible
- unplug the drill when changing a bit or touching the chuck for any other reason
- be prepared for sudden movements of the machine, especially when using large diameter drill bits or hole saws
Suggested Reading
Besides these safety notes, you should read about the different drill bits to know what you're doing! Different materials usually require different bits.
