Project:Dining Room Table
From CoMakingSpace Wiki
ProjectInfoBox Dining Room Table | |
---|---|
Status: | planning |
Initiator: | User:Biddlesby |
Team: | who else would like to help? |
Materials Used: | reclaimed wood |
Plans
I'm following the instructions here:
http://www.ana-white.com/2009/12/plans-farmhouse-table-knock-off-of.html
Tools
- Tape measure
- Square
- Hammer
- Drill
- Circular saw
- Sanding machine
- Paint brush
Materials
- Finish Oil 8
- Screws
- Wood Glue
- Sandpaper (pieces and for sanding machine)
I also need to find the following wood pieces. These dimensions are in inches: I intend to convert them to cm:
Description | Quantity | Height (inches) | Width (inches) | Length (inches) |
---|---|---|---|---|
Tabletop Pieces | 7 | 2,0 | 6,0 | 81,0 |
Outside Legs, Inside Legs, End Aprons | 10 | 2,0 | 4,0 | 28,5 |
Bottom End Supports for the Stretcher | 2 | 2,0 | 4,0 | 34,5 |
Stretcher, Side Aprons | 3 | 2,0 | 4,0 | 81,0 |
Overhang Supports, Ends | 2 | 2,0 | 2,0 | 28,5 |
Overhang Supports, Sides | 2 | 2,0 | 2,0 | 78,0 |
Under Tabletop Supports | 10 | 2,0 | 2,0 | 28,5 |
Breadboard Ends | 2 | 2,0 | 8,0 | 38,5 |