Project:Patricks Locker
From CoMakingSpace Wiki
| ProjectInfoBox Patricks Lockers | |
|---|---|
| |
| Status: | pretty much done |
| Release Date: | Early 2018 |
| Initiator: | Patrick |
| Materials Used: | Some scrap wood from the Project:Lockers |
The lockers are quite spacious, but for smaller part they need individual storage.
Divider
The divider in the middle was cut on the Circular Saw and the two pieces were screwed together. It is secured by a single bracket on the left side to the locker wall. The space on the lower left is sized to fit a sorting box from Aldi to store smaller parts.
First measurements.
First fitting.
Cutting in a slot to be able to reach the handle of the box.
Done.
Door
- Storage cabinet (from ALDI, thanks Ciaran!)
- 3D printed knipex holder
- 3D printed hex key holder
- 3D printed googles holder
- 3D printed Nerf holder...
