File:Do not cut from front.png
From CoMakingSpace Wiki
No higher resolution available.
Do_not_cut_from_front.png (133 × 87 pixels, file size: 2 KB, MIME type: image/png)
Summary
When cutting into a board (brown) at an angle it is important to not move into the board from the front parallel to the surface of the board for example with a router attachment (blue) or it will cut out more than intended (red). Either one needs to cut into the board from the side or from the front but at the desired angle (not sure how to do this in practice).
Licensing
This file is in the public domain (CC0). You must be the copyright holder to put it under such a license or it should be in the public domain already.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:52, 16 November 2023 | | 133 × 87 (2 KB) | Lorenz (talk | contribs) | When cutting into a board (brown) at an angle it is important to not move into the board from the front parallel to the surface of the board for example with a router attachment (blue) or it will cut out more than intended (red). Either one needs to cut into the board from the side or from the front but at the desired angle (not sure how to do this in practice). |
You cannot overwrite this file.
File usage
The following page uses this file:
