Project:Mechanical Keyboard

ProjectInfoBox Wax Cloth to Wrap Food
Status:	Completed
Release Date:	September 05, 2021
Initiator:	User:Kalunho
Materials Used:	PLA
Tools Used:	3D printer
Software Used:	Tinkercad, Blender, Meshmixer
Approx. Cost:	60€ (board) + 20€ (Switches) + 20€ (PLA)

I designed this custom mechanical keyboard case including the keycaps. The PCB I used for this project is the DZ60rgb v3 hot-swappable, therefore no soldering is required. I personally like small and compact keyboards, that is why I choose a 60% layout. The PCB is configured via QMK, which allows you to pretty much re-programm all the keys. For this build, I have also added four small white LEDs, which I soldered directly on the board (there is a 5v output pin somewhere on the board). These four LEDs are static and cannot be controlled via the software and light up as soon as you plug your USB-C cable in the keyboard. One 750g spool of regular PLA should be more than enough to print this keyboard.

Features

The main features of this keyboard are:

• Gasket Mount
• No screws are required
• fully 3D printable

Photos

• assembly steps
• 

  A

• 

  B

• 

  C

• 

  D

• 

  E

• 

  F