Project:Dining Room Table
From CoMakingSpace Wiki
| ProjectInfoBox Dining Room Table | |
|---|---|
| |
| Status: | planning |
| Initiator: | User:Biddlesby |
| Team: | who else would like to help? |
| Materials Used: | reclaimed wood |
Plans
I'm following the instructions here:
http://www.ana-white.com/2009/12/plans-farmhouse-table-knock-off-of.html
Tools
- Tape measure
- Square
- Hammer
- Drill
- Circular saw
- Sanding machine
- Paint brush
Materials
- Finish Oil 8
- Screws
- Wood Glue
- Sandpaper (pieces and for sanding machine)
I also need to find the following wood pieces. These dimensions are in inches: I intend to convert them to cm:
| Description | Quantity | Height (inches) | Width (inches) | Length (inches) |
|---|---|---|---|---|
| Tabletop Pieces | 7 | 2,0 | 6,0 | 81,0 |
| Outside Legs, Inside Legs, End Aprons | 10 | 2,0 | 4,0 | 28,5 |
| Bottom End Supports for the Stretcher | 2 | 2,0 | 4,0 | 34,5 |
| Stretcher, Side Aprons | 3 | 2,0 | 4,0 | 81,0 |
| Overhang Supports, Ends | 2 | 2,0 | 2,0 | 28,5 |
| Overhang Supports, Sides | 2 | 2,0 | 2,0 | 78,0 |
| Under Tabletop Supports | 10 | 2,0 | 2,0 | 28,5 |
| Breadboard Ends | 2 | 2,0 | 8,0 | 38,5 |
